Technical Data Sheet
ELECTROLUBE Wentworth House, Blakes Road, Wargrave, Berkshire, RG10 8AW, UK
Telephone: +44(0) 118 940 4031/ 3014 Fax: +44(0) 118 940 3084
ISO 9002 Registered Firm. Certificate No. FM 32082
PRODUCT DESCRIPTION:
Safewash 2000
DATE:
03/97
PRODUCT CODE:
SWA400H
PAGES:
1
PRODUCT DESCRIPTION
An aerosol containing a unique blend of biodegradable solvents in an aqueous medium formulated to re-
place CFCs or highly flammable cleaning solvents in electronic applications. A full range of bulk
Safewash
is also available for use in utrasonic and pressure spray applications.
PRODUCT USE
Excellent flux removal properties ensure fast and effective cleaning of printed circuit boards, electronic
assemblies and print screens. The unique foaming action dissolves and lifts dirt/ flux from the surface. The
foam ensures good contact time, hence economical use of the product.
FEATURES
*
*
*
*
*
100% Ozone Friendly
Biodegradable
Fast, effective foam action
Low corrosivity
Cleans to MIL P 28809A
APPLICATION
Spray aerosol onto area to be cleaned. Leave foam on assembly for 2 to 3 minutes. Brushing may be
required to remove stubborn deposits. Rinse thoroughly with tapwater and then rinse off with
Saferinse
2000
which removes the last trace of ions and aids drying. Dry with warm air, or with
Electrolube
Airduster
. Test before use on sensitive materials eg. ABS, Acrylic, Polycarbonate, Polystyrene.
TYPICAL PROPERTIES
Boiling Point
Flash Point
100°C
None
PACKAGING
ORDER CODE
400 ml Aerosol with integral brush
SWA400H
Copyright Electrolube 1997
All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification.
Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must
satisfy themselves as to the suitability of the product.