參數資料
型號: T555715M01-PP
廠商: Atmel Corp.
英文描述: CONNECTOR ACCESSORY
中文描述: 連接器附件
文件頁數: 5/30頁
文件大?。?/td> 711K
代理商: T555715M01-PP
5
T5557
4517E–RFID–02/03
Traceability Data
Structure
Blocks 1 and 2 of page 1 contain the traceability data and are programmed and locked
by Atmel during production testing. The most significant byte of block 1 is fixed to
‘E0’hex, the allocation class (ACL) as defined in ISO/IEC 15963-1. The second byte is
therefore defined as the manufacturer’s ID of Atmel (= ‘15’hex). The following 8 bits are
used as IC reference byte (ICR - Bits 47 to 40). The 3 most significant bits define the IC
and/or foundry version of the T5557. The lower 5 bits are by default reset (=00) as the
Atmel standard value. Other values may be assigned on request to high volume custom-
ers as tag issuer identification.
The lower 40 bits of the data encode the traceability information of Atmel and conform to
a unique numbering system. These 40 data bits are divided in two sub-groups, a 5-digit
lot ID number, the binary wafer number (5 bit) concatenated with the sequential die
number per wafer.
Figure 5.
T5557 Traceability Data Structure
ACL
MFC
ICR
Allocation class as defined in ISO/IEC 15963-1 = E0h
Manufacturer code of Atmel Corporation as defined in ISO/IEC 7816-6 = 15h
IC reference of silicon and/or tag manufacturer
Top 3 bits define IC revision
Lower 5 bits may contain a customer ID code on request
Manufacturer serial number consists of:
5-digit lot number, e.g., ’38765’
20 bits encoded as sequential die per wafer number (with top 5 bits = wafer#)
MSN
LotID
DPW
Operating the T5557
Initialization and
POR Delay
The Power-On-Reset (POR) circuit remains active until an adequate voltage threshold
has been reached. This in turn triggers the default start-up delay sequence. During this
configuration period of about 192 field clocks, the T5557 is initialized with the configura-
tion data stored in EEPROM block 0. During initialization of the configuration block 0, all
T55570x variants the load damping is active permanently (see Figure 10). The T55571x
types (without damping option) achieve a longer read range based on the lower activa-
tion field strength.
If the POR-delay bit is reset, no additional delay is observed after the configuration
period. Tag modulation in regular-read mode will be observed about 3 ms after entering
the RF field. If the POR delay bit is set, the T5557 remains in a permanent damping
state until 8190 internal field clocks have elapsed.
T
INIT
= (192 + 8190
POR delay) T
C
67 ms ;
T
C
= 8 μs at 125 kHz
12
32
31
1
...
13
...
Traceability
wafer #
MFC
ICR
Block 2
Block 1
1
...
8
16
17
9
...
ACL
MSN LotID
...
24
20
12
25
...
32
8
die on wafer #
LotID
18
19
...
Example:
' E0 '
' 15 '
' 00 '
' 41 '
' 557 '
相關PDF資料
PDF描述
T555715M01-TAS CONNECTOR ACCESSORY
T5743 UHF ASK/FSK Receiver
T5743P3 UHF ASK/FSK Receiver
T5743P6-TG UHF ASK/FSK Receiver
T5743P3-TG UHF ASK/FSK Receiver
相關代理商/技術參數
參數描述
T555715M01-TAS 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Multifunctional 330-bit Read/Write RF-Identification IC
T555715-PAE 功能描述:IC TRANSPONDER R/W 330BIT 330PF RoHS:否 類別:RF/IF 和 RFID >> RFID IC 系列:T555715 其它有關文件:CR14 View All Specifications 標準包裝:1 系列:- RF 型:收發器 頻率:13.56MHz 特點:ISO14443-B 封裝/外殼:16-SOIC(0.154",3.90mm 寬) 供應商設備封裝:16-SO 包裝:Digi-Reel® 其它名稱:497-5719-6
T-55583GD050J-LW-A-AAN 功能描述:TFT 顯示器 & 附件 5.0" TFT IPS 800 NIT High Bright RoHS:否 制造商:Sharp Microelectronics 產品:Displays 對角線:1.35 in 分辨率:96 x 96 模塊大小 - 寬x高x厚:28.2 mm x 32.34 mm x 1.4 mm 觀察區域 - 寬x高:24.192 mm x 24.192 mm 附加的觸摸屏:No 接口:Serial 背光: 背景色: 電源電壓:3 V 工作電流: 工作溫度范圍:- 10 C to + 60 C 封裝:
T-55583GD050J-LW-A-ABN 功能描述:TFT 顯示器 & 附件 5.0" WVGA LED 4-wire 640nits RoHS:否 制造商:Sharp Microelectronics 產品:Displays 對角線:1.35 in 分辨率:96 x 96 模塊大小 - 寬x高x厚:28.2 mm x 32.34 mm x 1.4 mm 觀察區域 - 寬x高:24.192 mm x 24.192 mm 附加的觸摸屏:No 接口:Serial 背光: 背景色: 電源電壓:3 V 工作電流: 工作溫度范圍:- 10 C to + 60 C 封裝:
T-55583GD050J-LW-A-ACN 制造商:Kyocera Industrial Ceramics 功能描述:5.0" TFT WVGA 800 NIT; W/O TOUCH - Bulk