參數資料
型號： T63H0008A
廠商： TM Technology, Inc.
英文描述： Li-Ion/Polymer Battery for one-cell Protector
中文描述： Li-Ion/Polymer電池單細胞保護
文件頁數： 6/20頁
文件大小： 341K
代理商： T63H0008A
TE
CH
tm
MEASUREMENT CIRCUITS
T63H0008A
TM Technology, Inc. reserves the right
P. 6
Publication Date: Dec. 2003
to change products or specifications without notice. Revision:A
Unless otherwise specified, the output voltage levels “H” and “L” at COUT and DOUT pins are judged by the
threshold voltage (1.0V) of the N channel FET. Judge the COUT pin level with respect to V- and the DOUT pin
level with respect to VSS.
(1) Measurement Condition 1, Measurement Circuit 1
(Overcharge detection voltage, Overcharge hysteresis voltage).
The overcharge detection voltage (VDET1) is defined by the voltage between VDD and VSS at which VCO
goes “L” from “H” when the voltage V1 is gradually increased from the starting condition V1=3.5V and
V2=0V. The overcharge hysteresis voltage (VHCT1) is then defined by the difference between the
overcharge detection voltage (VDD) and the voltage between VDD and VSS at which VCOUT goes “H”
from “L” when the voltage V1 is gradually decreased.
(2) Measurement Condition 2, Measurement Circuit 2
(Over-discharge detection voltage, Over-discharge hysteresis voltage)
The over-discharge detection voltage (VDET2) is defined by the voltage between VDD and VSS at which
VDO goes “L” from “H” when the voltage V1 is gradually decreased from the starting condition V1=3.5V
and V2=0V. The over-discharge hysteresis voltage (VHDT2 ) is then defined by the difference between the
over-discharge detection voltage (VDET2) and the voltage between VDD and VSS at which VDO goes
“H” from “L” when the voltage V1 is gradually increased.
(3) Measurement Condition 3, Measurement Circuit 2
(Over-current 1 detection voltage, Over-current 2 detection voltage, Load short-circuiting detection voltage)
The over-current 1 detection voltage is defined by the voltage between V- and VSS whose delay time for
changing VDO from “H” to “L” lies between the minimum and the maximum value of the over-current 1
detection delay time when the voltage V2 is increased rapidly within 10us from the starting condition
V1=3.5V and V2=0V.
The over-current 2 detection voltage is defined by the voltage between V- and VSS whose delay time for
changing VDO from “H” to “L” lies between the minimum and the maximum value of the over-current 2
detection delay time when the voltage V2 is increased rapidly within 10us from the starting condition
V1=3.5V and V2=0V.
The load short-circuiting detection voltage is defined by the voltage between V- and VSS whose delay time
for changing VDO from “H” to “L” lies between the minimum and the maximum value of the load
short-circuiting detection delay time when the voltage V2 is increased rapidly within 10us from the starting
condition V1=3.5V and V2=0V.
相關PDF資料
PDF描述
T63H0008A-AX Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-BX Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-CX Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-DX Li-Ion/Polymer Battery for one-cell Protector
T66H0001A 240 output LCD Segment/Common Driver IC
相關代理商/技術參數
參數描述
T63H0008A-AX 制造商:TMT 制造商全稱:TMT 功能描述:Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-BX 制造商:TMT 制造商全稱:TMT 功能描述:Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-CX 制造商:TMT 制造商全稱:TMT 功能描述:Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-DX 制造商:TMT 制造商全稱:TMT 功能描述:Li-Ion/Polymer Battery for one-cell Protector
T63XA-100-10-D06 制造商:Vishay Roederstein 功能描述:RES TRMR 100 OHM 10% 1/4W 13TURN 1.8MM PIN TH - Rail/Tube
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*