參數資料
型號： TB1262F
廠商： Toshiba Corporation
英文描述： TOSHIBA BiCMOS INTEGRATED CIRCUIT, SILICON MONOLITHIC
中文描述： 東芝的BiCMOS集成電路，硅單片
文件頁數： 35/66頁
文件大?。?/td> 1544K
代理商： TB1262F
TB1261F/TB1262F
2002-6-30 35 / 66
Note
P6
Items/Symbols
Video output S/N
/ S/N(p)
Bus conditions
RF AGC:except 0
PIF Freq. :
38.9MHz
Others : Preset
RF AGC:except 0
PIF Freq. :
38.9MHz
Others : Preset
Measurement methods
(1) Input a signal that 38.9[MHz], 90[dB( V)], and 87.5 [%]
modulated by black video signal at pin 6.
(2) Measure the video S/N for pin 68 output (HPF : 100[kHz],
LPF : 5[MHz], CCIR weighted) (S/N(p)[dB]).
(1) Input a signal composed of following 3 signals at pin 79;
38.90[MHz]/90[dB( V)],
34.47[MHz]/80dB( V)]
33.40[MHz]/80[dB( V)]
(2) Adjust pin 1 voltage so that the bottom of pin 68 output is
equal to sync. tip level.
(3) Measure the 1.07[MHz] level against the 4.43[MHz]
level(=0[dB]) (IM[dB]).
(1) Remove all connection from pin 79 and pin 80.
(2) Measure the resistance (Zin R(p)[k ]) and capacitance (Zin
C(p)[pF]) of pin 79 and pin 80 by the impedance meter.
P7
Intermodulation
/ IM
P8
PIF input resistance
/ Zin R(p)
PIF
capacitance
/ Zin C(p)
RF AGC output
voltage
/ VAGC max
/ VAGC min
input
Preset
P9
RF AGC:Adjust
PIF Freq. :
38.9MHz
Others : Preset
(1) Input a 38.9[MHz], 90[dB( V)] signal at pin 79.
(2) Adjust RF AGC so that the pin 78 voltage is 4.5V.
(3) Increase the IF input level to 107dB(uV).
(4) Measure the pin 78 voltage (VAGC min[V]).
(5) Connect pin 79 and pin 80 to GND.
(6) Measure the pin 78 voltage (VAGC max[V]).
P10
RF delay point
/ v Dly min
/ v Dly max
RF AGC
:
Adjust
PIF Freq.
38.9MHz
RF AGC: 01/3F
Others : Preset
(1) Input a 38.9[MHz], 90[dB( V)] signal at pin 79.
(2) Set the data of “RF AGC” to 01(h).
(3) Decrease the IF input level, measure the input level at
which the voltage at pin 78 turn to be 4.5[V] (v Dly
min[dB( V)]).
(4) Set the data of “RF AGC” to 3F(h).
(5) Increase the IF input level, measure the input level at
which the voltage at pin 78 turn to be 4.5[V] (v Dly
max[dB( V)]).
(1) Set the bit of “PIF Freq.” to “(0,1,1), 38.9MHz”.
(2) Input a signal that f0=38.9[MHz], 60[dB(V)] at pin 79.
(3) As read the bit of “IF lock”, sweep up/down the input signal
frequency.
(4) Measure fsuL, fsuH, fsdH, fsdL shown as below.
fpH(p) = fsdH – f0
fpL(p) = fsuL – f0
fhH(p) = fsuH – f0
fhL(p) = fsdL – f0
[Read BUS DATA] The bit of "IF lock"
IF LOCK 1
P11
Capture range of the
PLL
/ fpH(p)
/ fpL(p)
Hold range of the
PLL
/ fhH(p)
/ fhL(p)
RF AGC : except
0
PIF Freq. :
38.9MHz
Others : Preset
fhL(p)
fpH(p)
frequency
fpL(p)
fhH(p)
frequency
IF LOCK 0
IF LOCK 1
IF LOCK 0
(1) Set the bit of “VCO Adj. Req.” to “1”, and set the bit of “VCO
Adj. Req.” to “0”.
(2) Set the FET probe which connected to the spectrum analyzer
near by pin 50 or pin 51 (Don’t touch the probe directly to pin
50 or to pin 51).
(3) Apply 2.3[V] to pin 47, and measure frequency of the VCO
oscillation by the spectrum analyzer (fLVCO[MHz]).
(4) Apply 2.7[V] to pin 47, and measure frequency of the VCO
oscillation by the spectrum analyzer (fHVCO[MHz]).
(5) [MHz/V] = (fHVCO-fLVCO)/0.4
P12
Control steepness of
the VCO
/
PIF Freq. :
38.9MHz
Others : Preset
相關PDF資料
PDF描述
TB20.0 HIGH-ENERGY TRIGGERED SPARK GAPS
TB10.0 Beldsol Magnet Wire, Approx. Spool Length: 6400'; Conductor Size AWG:36; No. Strands x Strand Size:Solid; Approval Categories:J-W-1177/9; MW 28-C (Single); Conductor Material:Copper RoHS Compliant: Yes
TB15.0 MU-MU FIBER JUMPER SINGLE MODE PVC 10 METER
TB25.0 XTAL CER SMT 6X3.5 2PAD
TB5.0 HIGH-ENERGY TRIGGERED SPARK GAPS
相關代理商/技術參數
參數描述
TB1274BFG 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:LUMINANCE, CHROMA AND SYNCHRONIZING SIGNALS PROCESSOR IC FOR PAL / NTSC / SECAM COLOR TV
TB12A 制造商:Lenline 功能描述:
TB12A6C 制造商:STMicroelectronics 功能描述:TB12A6C - Rail/Tube
TB12C6CM 制造商:STMicroelectronics 功能描述:TB12C6CM - Rail/Tube
TB13 制造商:Curtis Industries 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*