- 您現在的位置：買賣IC網 > PDF目錄371180 > TBA120S (Electronic Theatre Controls, Inc.) FM-ZF-Verstarker mit Demodulator PDF資料下載
參數資料
| 型號： | TBA120S |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | FM-ZF-Verstarker mit Demodulator |
| 中文描述： | 調頻采埃孚，Verstarker麻省理工解調器 |
| 文件頁數： | 9/9頁 |
| 文件大小： | 93K |
| 代理商： | TBA120S |
March 1986
9
Philips Semiconductors
Product specification
Sound I.F. amplifier/demodulator for TV
TBA120U
SOLDERING
Introduction
There is no soldering method that is ideal for all IC packages. Wave soldering is often preferred when through-hole and
surface mounted components are mixed on one printed-circuit board. However, wave soldering is not always suitable for
surface mounted ICs, or for printed-circuits with high population densities. In these situations reflow soldering is often
used.
This text gives a very brief insight to a complex technology. A more in-depth account of soldering ICs can be found in our
“IC Package Databook”(order code 9398 652 90011).
Soldering by dipping or by wave
The maximum permissible temperature of the solder is 260
°
C; solder at this temperature must not be in contact with the
joint for more than 5 seconds. The total contact time of successive solder waves must not exceed 5 seconds.
The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the
specified maximum storage temperature (T
stg max
). If the printed-circuit board has been pre-heated, forced cooling may
be necessary immediately after soldering to keep the temperature within the permissible limit.
Repairing soldered joints
Apply a low voltage soldering iron (less than 24 V) to the lead(s) of the package, below the seating plane or not more
than 2 mm above it. If the temperature of the soldering iron bit is less than 300
°
C it may remain in contact for up to
10 seconds. If the bit temperature is between 300 and 400
°
C, contact may be up to 5 seconds.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
Data sheet status
Objective specification
Preliminary specification
Product specification
Short-form specification
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
The data in this specification is extracted from a full data sheet with the same type
number and title. For detailed information see the relevant data sheet or data handbook.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
相關PDF資料 |
PDF描述 |
|---|---|
| TC9200 | Indoor Camera Mounts |
| TDA1001 | Interference and noise suppression circuit for FM receivers |
| TDA1001B | Interference and noise suppression circuit for FM receivers |
| TDA1001BT | Interference and noise suppression circuit for FM receivers |
| TDA10021 | DVB-C channel receiver |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TBA120T | 制造商:TEMIC 制造商全稱:TEMIC Semiconductors 功能描述:FM IF amplifier and demodulator |
| TBA120U | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Sound I.F. amplifier/demodulator for TV |
| TBA120U/V5 | 制造商:NXP Semiconductors 功能描述: |
| TBA121 | 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:FM-Sound IF with SCART Switch and Volume Control |
| TBA12-11EGWA | 功能描述:LED 顯示器和配件 Dot Matrix Red Grn Common Anode RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。