參數資料
型號： TDA4814A
廠商： INFINEON TECHNOLOGIES AG
元件分類： 穩壓器
英文描述： POWER FACTOR CONTROLLER, PDIP14
封裝： PLASTIC, DIP-14
文件頁數： 14/17頁
文件大?。?/td> 321K
代理商： TDA4814A
Version 2.0
6
1 Jun 1996
TDA 4814
Circuit Description
This device has a conditioning circuit for the internal power supply. It allows standby operation with
very low current consumption (less than 0.5 mA), a hysteresis between enable and switch-off levels
and an internal voltage stabilization. An integrated Z-diode limits the voltage on
V
S , when
impressed current is fed.
The output driver (Q SIP) is controlled by detector input and current comparator.
The detector input (I DET) which is highly resistive in the operating state reacts on hysteresis-
determined voltage levels. To keep down the amount of circuitry required, clamping diodes are
provided which allow control by a current source.
The operating state of the boost converter choke is sensed via the detector input. H-level means
that the choke discharges and the output driver is inhibited. H-level sets a flip-flop, which stores the
switch-off instruction of the current comparator to reduce susceptibility to interference. As soon as
demagnetization is finished the choke voltage reverses and the detector input is set to L-level, thus
enabling the output driver. This ensures that the choke is always currentless when the SIPMOS
transistor switches on and that no current gaps appear.
The nominal voltage of the multiplier output is compared to the voltage derived from the actual line
current (– I COMP), thus setting the switch-off threshold of the comparator. The current comparator
blocks the output driver when the nominal peak value of the choke current given by the multiplier
output is reached.
This state is maintained in the flip-flop until H-level appears at detector input which takes over the
hold function and resets the flip-flop.
Operating states might occur without any useful detector signal. This is the case with magnetic
saturation of the choke and when the input voltage approaches or exceeds the output voltage as,
for example, during switch-on. The driver remains inhibited for the flip-flop due to the absent set
signal.
The trigger signal can be derived from the subsequent lamp generator, a SMPS control device or,
if neither one of them is available, from the start circuit designed as a pulse generator in the
TDA 4814. The trigger signal level should be so low that with standard operation the signal from the
detector winding dominates.
The multiplier delivers the preset nominal value for the current comparator by multiplying the input
voltage, which determines the nominal waveform (IM1) and the output voltage of the control
amplifier.
The control amplifier stabilizes the output dc voltage of the active harmonic filter in the event of load
and input voltage changes. The control amplifier compares the actual output voltage to a
reference voltage which is provided in the IC and stable with temperature.
相關PDF資料
PDF描述
TDA4815 0.5 A POWER FACTOR CONTROLLER, 300 kHz SWITCHING FREQ-MAX, PDIP20
TDA4851N HORIZ/VERT DEFLECTION IC, PDIP20
TDA4852N HORIZ/VERT DEFLECTION IC, PDIP20
TDA4858N HORIZ/VERT DEFLECTION IC, PDIP32
TDA4863 POWER FACTOR CONTROLLER, PDIP8
相關代理商/技術參數
參數描述
TDA4817 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Power Factor Controller IC for High Power Factor and Active Harmonic Filtering
TDA4817G 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Power Factor Controller IC for High Power Factor and Active Harmonic Filtering
TDA4820 制造商:未知廠家 制造商全稱:未知廠家 功能描述:
TDA4820T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Sync separation circuit for video applications
TDA4821P 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Autosize IC for colour monitors
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*