參數資料
型號: TDA6107JF
廠商: NXP SEMICONDUCTORS
元件分類: 音頻/視頻放大
英文描述: Triple video output amplifier
中文描述: 3 CHANNEL, VIDEO AMPLIFIER, PZFM9
封裝: PLASTIC, SOT-111-1, DIL-BENT-SIL, 9 PIN
文件頁數: 15/20頁
文件大?。?/td> 95K
代理商: TDA6107JF
2002 Oct 18
15
Philips Semiconductors
Product specification
Triple video output amplifier
TDA6107JF
SOLDERING
Introduction to soldering through-hole mount
packages
This text gives a brief insight to wave, dip and manual
soldering.Amorein-depth account ofsoldering ICscanbe
found in our “Data Handbook IC26; Integrated Circuit
Packages”(document order number 9398 652 90011).
Wave soldering is the preferred method for mounting of
through-hole mount IC packages on a printed-circuit
board.
Soldering by dipping or by solder wave
The maximum permissible temperature of the solder is
260
°
C; solder at this temperature must not be in contact
with the joints for more than 5 seconds.
Thetotalcontacttimeofsuccessivesolderwavesmustnot
exceed 5 seconds.
The device may be mounted up to the seating plane, but
the temperature of the plastic body must not exceed the
specified maximum storage temperature (T
stg(max)
). If the
printed-circuit board has been pre-heated, forced cooling
may be necessary immediately after soldering to keep the
temperature within the permissible limit.
Manual soldering
Apply the soldering iron (24 V or less) to the lead(s) of the
package, either below the seating plane or not more than
2 mm above it. If the temperature of the soldering iron bit
is less than 300
°
C it may remain in contact for up to
10 seconds. If the bit temperature is between
300 and 400
°
C, contact may be up to 5 seconds.
Suitability of through-hole mount IC packages for dipping and wave soldering methods
Note
1.
For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit board.
PACKAGE
SOLDERING METHOD
DIPPING
WAVE
DBS, DIP, HDIP, SDIP, SIL
suitable
suitable
(1)
相關PDF資料
PDF描述
TDA6508 3-band mixer/oscillator and PLL for terrestrial tuners
TDA6508A 3-band mixer/oscillator and PLL for terrestrial tuners
TDA6508ATT 3-band mixer/oscillator and PLL for terrestrial tuners
TDA6508TT 3-band mixer/oscillator and PLL for terrestrial tuners
TDA6509 3-band mixer/oscillator and PLL for terrestrial tuners
相關代理商/技術參數
參數描述
TDA6107JFN3 制造商:PHILIPS/NXP 功能描述:
TDA6107Q 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Triple video output amplifier
TDA6108 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Triple video output amplifier
TDA6108AJF 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Triple video output amplifier
TDA6108JF 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Triple video output amplifier