參數資料
型號： TDA6509A
廠商： NXP Semiconductors N.V.
英文描述： 3-band mixer/oscillator and PLL for terrestrial tuners
中文描述： 3波段混頻器/振蕩器，鎖相環路的地面電視調諧器
文件頁數： 40/42頁
文件大?。?/td> 274K
代理商： TDA6509A
2005 Mar 25
40
Philips Semiconductors
Product specification
3-band mixer/oscillator and PLL for
terrestrial tuners
TDA6508; TDA6508A;
TDA6509; TDA6509A
16.5
Suitability of surface mount IC packages for wave and reflow soldering methods
Notes
1.
For more detailed information on the BGA packages refer to the“(LF)BGA Application Note”(AN01026); order a copy
from your Philips Semiconductors sales office.
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”
These transparent plastic packages are extremely sensitive to reflow soldering conditions and must on no account
be processed through more than one soldering cycle or subjected to infrared reflow soldering with peak temperature
exceeding 217
°
C
±
10
°
C measured in the atmosphere of the reflow oven. The package body peak temperature
must be kept as low as possible.
These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
If wave soldering is considered, then the package must be placed at a 45
°
angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger than
0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered pre-mounted
on flex foil. However, the image sensor package can be mounted by the client on a flex foil by using a hot bar
soldering process. The appropriate soldering profile can be provided on request.
Hot bar soldering or manual soldering is suitable for PMFP packages.
2.
3.
4.
5.
6.
7.
8.
9.
PACKAGE
(1)
SOLDERING METHOD
WAVE
REFLOW
(2)
BGA, HTSSON..T
(3)
, LBGA, LFBGA, SQFP, SSOP..T
(3)
, TFBGA,
VFBGA, XSON
DHVQFN, HBCC, HBGA, HLQFP, HSO, HSOP, HSQFP, HSSON,
HTQFP, HTSSOP, HVQFN, HVSON, SMS
PLCC
(5)
, SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO, VSSOP
CWQCCN..L
(8)
, PMFP
(9)
, WQCCN..L
(8)
not suitable
suitable
not suitable
(4)
suitable
suitable
not recommended
(5)(6)
not recommended
(7)
not suitable
suitable
suitable
suitable
not suitable
相關PDF資料
PDF描述
TDA6509AHN 3-band mixer/oscillator and PLL for terrestrial tuners
TDA6509ATT 3-band mixer/oscillator and PLL for terrestrial tuners
TDA6509HN 3-band mixer/oscillator and PLL for terrestrial tuners
TDA6509TT 3-band mixer/oscillator and PLL for terrestrial tuners
TDA8007B IC LOGIC 1G02 SINGLE 2-INPUT POSITIVE-NOR GATE -40+85C SOT-23-5 3000/REEL
相關代理商/技術參數
參數描述
TDA6509AHN 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:3-band mixer/oscillator and PLL for terrestrial tuners
TDA6509ATT 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:3-band mixer/oscillator and PLL for terrestrial tuners
TDA6509HN 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:3-band mixer/oscillator and PLL for terrestrial tuners
TDA6509TT 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:3-band mixer/oscillator and PLL for terrestrial tuners
TDA6600-2 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:TV Stereo Decoder with Matrix Preliminary Data
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*