參數資料
型號： TDA9801T
廠商： NXP SEMICONDUCTORS
元件分類： 接收器
英文描述： Single standard VIF-PLL demodulator and FM-PLL detector
中文描述： AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO20
封裝： PLASTIC, SOT-163-1, SO-20
文件頁數： 6/32頁
文件大?。?/td> 152K
代理商： TDA9801T
1999 Aug 26
6
Philips Semiconductors
Product specification
Single standard VIF-PLL demodulator
and FM-PLL detector
TDA9801
FUNCTIONAL DESCRIPTION
3-stage IF amplifier
The VIF amplifier consists of three AC-coupled differential
amplifier stages (see Fig.1). Each differential stage
comprises a feedback network controlled by emitter
degeneration.
AGC detector, IF AGC and tuner AGC
The automatic control voltage to maintain the video output
signal at a constant level is generated in accordance with
the transmission standard. Since the TDA9801(T) is
suitable for negative modulation only the peak sync pulse
level is detected.
TheAGCdetectorchargesanddischargescapacitorC
AGC
to set the IF amplifier and tuner gain. The voltage on
capacitor C
AGC
is transferred to an internal IF control
signal, and is fed to the tuner AGC to generate the tuner
AGC output current on pin TAGC (open-collector output).
The tuner AGC takeover point level is set at pin TOP. This
allows the tuner to be matched to the SAW filter in order to
achieve the optimum IF input level.
Frequency detector and phase detector
The VIF amplifier output signal is fed into a frequency
detector and into a phase detector. During acquisition the
frequency detector produces a DC current proportional to
the frequency difference between the input and the VCO
signal. After frequency lock-in the phase detector
produces a DC current proportional to the phase
difference between the VCO and the input signal. The DC
current of either frequency detector or phase detector is
converted into a DC voltage via the loop filter which
controls the VCO frequency.
Video demodulator
The true synchronous video demodulator is realized by a
linear multiplier which is designed for low distortion and
widebandwidth.ThevisionIFinputsignalismultipliedwith
the ‘in phase’ component of the VCO output.
The demodulator output signal is fed via an integrated
low-pass filter (f
g
= 12 MHz) for suppression of the carrier
harmonics to the video amplifier.
VCO, AFC detector and travelling wave divider
The VCO operates with a symmetrically connected
reference LC circuit, operating at the double vision carrier
frequency. Frequency control is performed by an internal
variable capacitor diode.
The voltage to set the VCO frequency to the actual double
vision carrier frequency is also amplified and converted for
the AFC output current.
The VCO signal is divided-by-2 with a Travelling Wave
Divider (TWD) which generates two differential output
signals with a 90 degree phase difference independent of
the frequency.
Video amplifier
The composite video amplifier is a wide bandwidth
operational amplifier with internal feedback. A nominal
positive video signal of 1 V (p-p) is present at pin VSO.
Buffer amplifier and noise clipper
The input impedance of the 7 dB wideband CVBS buffer
amplifier (with internal feedback) is suitable for ceramic
sound trap filters. Pin CVBS provides a positive video
signal of 2 V (p-p). Noise clipping is provided internally.
Sound demodulation
L
IMITER AMPLIFIER
The FM sound intercarrier signal is fed to pin SI and
through a limiter amplifier before it is demodulated.
The result is high sensitivity and AM suppression.
The limiter amplifier consists of 7 stages which are
internally AC-coupled in order to minimizing the DC offset.
FM-PLL
DETECTOR
The FM-PLL demodulator consists of an RC oscillator,
loop filter and phase detector. The oscillator frequency is
locked on the FM intercarrier signal from the limiter
amplifier. As a result of this locking, the RC oscillator is
frequency modulated. The modulating voltage (AF signal)
is used to control the oscillator frequency. By this, the
FM-PLL operates as an FM demodulator.
AF
AMPLIFIER
The audio frequency amplifier with internal feedback is
designed for high gain and high common-mode rejection.
The low-level AF signal output from the FM-PLL
demodulator is amplified and buffered in a low-ohmic
audio output stage. An external decoupling capacitor C
DAF
removes the DC voltage from the audio amplifier input.
By using the sound mute switch (pin MUTE) the AF
amplifier is set in the mute state.
相關PDF資料
PDF描述
TDA9802 Multistandard VIF-PLL demodulator and FM-PLL detector
TDA9802T Multistandard VIF-PLL demodulator and FM-PLL detector
TDA9806 Multistandard VIF-PLL and FM-PLL demodulator
TDA9808 Single standard VIF-PLL with QSS-IF and FM-PLL demodulator
TDA9808T Single standard VIF-PLL with QSS-IF and FM-PLL demodulator
相關代理商/技術參數
參數描述
TDA9801T/V1,118 功能描述:射頻無線雜項 VIFPLL DEN/FMPLL DET RoHS:否 制造商:Texas Instruments 工作頻率:112 kHz to 205 kHz 電源電壓-最大:3.6 V 電源電壓-最小:3 V 電源電流:8 mA 最大功率耗散: 工作溫度范圍:- 40 C to + 110 C 封裝 / 箱體:VQFN-48 封裝:Reel
TDA9801TD-T 功能描述:射頻無線雜項 VIFPLL DEN/FMPLL DET RoHS:否 制造商:Texas Instruments 工作頻率:112 kHz to 205 kHz 電源電壓-最大:3.6 V 電源電壓-最小:3 V 電源電流:8 mA 最大功率耗散: 工作溫度范圍:- 40 C to + 110 C 封裝 / 箱體:VQFN-48 封裝:Reel
TDA9802 制造商:PHIL 功能描述:
TDA9802T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Multistandard VIF-PLL demodulator and FM-PLL detector
TDA9806 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Multistandard VIF-PLL and FM-PLL demodulator
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*