- 您現在的位置：買賣IC網 > PDF目錄383990 > TDA9874AH (NXP SEMICONDUCTORS) Digital TV sound demodulator/decoder PDF資料下載
參數資料
| 型號： | TDA9874AH |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 接收器 |
| 英文描述： | Digital TV sound demodulator/decoder |
| 中文描述： | AM/FM, AUDIO DEMODULATOR, PQFP44 |
| 封裝： | 14 X 14 MM, 2.20 MM HEIGHT, PLASTIC, SOT-205-1, QFP-44 |
| 文件頁數： | 10/68頁 |
| 文件大?。?/td> | 231K |
| 代理商： | TDA9874AH |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁當前第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁
1999 Dec 03
10
Philips Semiconductors
Preliminary specification
Digital TV sound demodulator/decoder
TDA9874A
6.1.5
FM
DECODING
A2-carrierstereodecoderrecoverstheleftandrightsignal
channels from the demodulated sound carriers. Both the
European and Korean stereo systems are supported.
Automatic FM dematrixing is also supported, which means
that the FM sound mode identification (mono, stereo or
dual) switches the FM dematrix directly. No loop via the
microcontroller is needed.
For highly overmodulated signals, a high deviation mode
for monaural audio sound single carrier demodulation can
be selected.
NICAM decoding is still possible in high deviation mode.
6.1.6
FM
IDENTIFICATION
The identification of the FM sound mode is performed by
AM synchronous demodulation of the pilot and
narrow-band detection of the identification frequencies.
TheresultisavailableviatheI
2
C-businterface.Aselection
can be made via the I
2
C-bus for B/G, D/K and M
standards, and for three different time constants that
representdifferenttrade-offsbetweenspeedandreliability
ofidentification.Apilotdetectorallowsthecontrolsoftware
to identify an analog 2-carrier (A2) transmission within
approximately 0.1 s.
Automatic FM dematrixing, depending on the
identification, is possible.
6.1.7
NICAM
DEMODULATION
The NICAM signal is transmitted in a DQPSK code at a bit
rate of 728 kbits/s. The NICAM demodulator performs
DQPSK demodulation and passes the resulting bitstream
and clock signal to the NICAM decoder and, for evaluation
purposes, to various pins.
Atimingloopcontrolsthefrequencyofthecrystaloscillator
to lock the sampling instants to the symbol timing of the
NICAM data.
6.1.8
NICAM
DECODING
The device performs all decoding functions in accordance
with the “EBU NICAM 728 specification” After locking to
the frame alignment word, the data is descrambled by
applying the defined pseudo-random binary sequence.
The device then synchronizes to the periodic frame flag
bit C0.
The status of the NICAM decoder can be read out from the
NICAM status register by the user (see Section 10.4.2).
The OSB bit indicates that the decoder has locked to the
NICAM data. The VDSP bit indicates that the decoder has
locked to the NICAM data and that the data is valid sound
data. The C4 bit indicates that the sound conveyed by the
FM mono channel is identical to the sound conveyed by
the NICAM channel.
Theerrorbytecontainsthenumberofsoundsampleerrors
(resulting from parity checking) that occurred in the past
128 ms period. The Bit Error Rate (BER) is approximately
0.0000174 times the contents of the error byte:
total bits
6.1.9
NICAM
AUTO
-
MUTE
This function is enabled by setting bit AMUTE LOW
(see Section 10.3.12).Upperandlowererrorlimitsmaybe
definedbywritingappropriatevaluestotworegistersinthe
I
2
C-bussection(seeSections 10.3.14and10.3.15).When
the number of errors in a 128 ms period exceeds the upper
error limit, the auto-mute function will switch the output
sound from NICAM to whatever sound is on the first sound
carrier (FM or AM) or to the analog mono input. When the
error count is smaller than the lower error limit, the NICAM
sound is restored.
The auto-mute function can be disabled by setting bit
AMUTE HIGH. In this case clicks become audible when
the error count increases. The user will hear a signal of
degrading quality.
If no NICAM sound is received, the outputs are switched
from the NICAM channel to the 1st sound carrier.
A decision to enable or disable the auto-mute is taken by
the microprocessor based on an interpretation of the
application control bits C1, C2, C3 and C4, and possibly
any additional strategy implemented by the user in the
microcontroller software.
When the AM sound in NICAM L systems is demodulated
in the 1st sound IF and the audio signal connected to the
mono input of the TDA9874A, the controlling
microprocessor has to ensure switching from NICAM
reception to mono input, if auto-muting is desired. This can
be achieved by setting the AMSEL bit HIGH and the
AMUTE bit LOW (see Section 10.3.12).
BER
bit errors
error byte
1.74
×
10
5
–
×
≈
=
相關PDF資料 |
PDF描述 |
|---|---|
| TDA9874APS | Digital TV sound demodulator/decoder |
| TDCS6440G | SONET/SDH 40 Gbits/s Cross Connect( SONET/SDH 40G位/秒交叉連接器件) |
| TDK5100F | 434 MHz ASK/FSK Transmitter in 10-pin Package |
| TDK5100 | ASK/FSK Transmitter 868/433 MHz |
| TE28F004S3-150 | BYTE-WIDE SMART 3 FlashFile MEMORY FAMILY 4, 8, AND 16 MBIT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA9874AH/V2,557 | 功能描述:音頻放大器 DIGITAL STEREO DECODER VCR RoHS:否 制造商:STMicroelectronics 產品:General Purpose Audio Amplifiers 輸出類型:Digital 輸出功率: THD + 噪聲: 工作電源電壓:3.3 V 電源電流: 最大功率耗散: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-64 封裝:Reel |
| TDA9874AHB | 功能描述:音頻放大器 DIGITAL STEREO DECODER VCR RoHS:否 制造商:STMicroelectronics 產品:General Purpose Audio Amplifiers 輸出類型:Digital 輸出功率: THD + 噪聲: 工作電源電壓:3.3 V 電源電流: 最大功率耗散: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-64 封裝:Reel |
| TDA9874APS | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Digital TV sound demodulator/decoder |
| TDA9874H | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Digital TV sound demodulator/decoder |
| TDA9875 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Digital TV Sound Processor DTVSP |
發(fā)布緊急采購，3分鐘左右您將得到回復。