
THS6002
DUAL DIFFERENTIAL LINE DRIVERS AND RECEIVERS
SLOS202D– JANUARY 1998– REVISED JULY 1999
2
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
description (continued)
The THS6002 is packaged in the patented PowerPAD package. This package provides outstanding thermal
characteristics in a small footprint package, which is fully compatible with automated surface mount assembly
procedures. The exposed thermal pad on the underside of the package is in direct contact with the die. By simply
soldering the pad to the PWB copper and using other thermal outlets, the heat is conducted away from the
junction.
AVAILABLE OPTIONS
PACKAGED DEVICE
TA
PowerPAD PLASTIC
SMALL OUTLINE
(DWP)
EVALUATION
MODULE
0
°
C to 70
°
C
–40
°
C to 85
°
C
The DWP packages are available taped and reeled. Add an R suffix to the
device type (i.e., THS6002CDWPR)
THS6002CDWP
THS6002EVM
THS6002IDWP
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Supply voltage, V
CC+
to V
CC–
Input voltage, V
I
(driver and receiver)
Output current, I
O
(driver) (see Note 1)
Output current, I
O
(receiver) (see Note 1)
Differential input voltage, V
ID
(driver and receiver)
Continuous total power dissipation at (or below) T
A
= 25
°
C (see Note 1)
Operating free air temperature, T
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature, T
stg
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature, 1,6 mm (1/16 inch) from case for 10 seconds
33 V
±
V
CC
800 mA
150 mA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 V
5.8 W
. . . . . . . . . . . . . . . . . . . . . . . . . .
–40
°
C to 85
°
C
–65
°
C to 125
°
C
300
°
C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The THS6002 incorporates a PowerPad on the underside of the chip. This acts as a heatsink and must be connected to a thermal
dissipation plane for proper power dissipation. Failure to do so can result in exceeding the maximum junction temperature, which could
permanently damage the device. See the Thermal Informationsection of this document for more information about PowerPad
technology.
recommended operating conditions
MIN
±
4.5
TYP
MAX
±
16
UNIT
Supply voltage VCC and VCC
Supply voltage, VCC+ and VCC–
Split supply
V
Single supply
C suffix
9
0
32
70
Operating free-air temperature TA
O erating free-air tem erature, TA
°
C
I suffix
–40
85