![](http://datasheet.mmic.net.cn/390000/TN2524_datasheet_16838702/TN2524_1.png)
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.
Features
Low threshold — 2.0V max.
High input impedance
Low input capacitance — 125pF max.
Fast switching speeds
Low on resistance
Free from secondary breakdown
Low input and output leakage
Complementary N- and P-channel devices
Low Threshold DMOS Technology
These low threshold enhancement-mode (normally-off) transis-
tors utilize a vertical DMOS structure and Supertex's well-proven
silicon-gate manufacturing process. This combination produces
devices with the power handling capabilities of bipolar transis-
tors and with the high input impedance and positive temperature
coefficient inherent in MOS devices. Characteristic of all MOS
structures, these devices are free from thermal runaway and
thermally induced secondary breakdown.
Supertex vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where very low threshold
voltage, high breakdown voltage, high input impedance, low input
capacitance, and fast switching speeds are desired.
TN2524
Low Threshold
Package Option
N-Channel Enhancement-Mode
Vertical DMOS FETs
Applications
Logic level interfaces – ideal for TTL and CMOS
Solid state relays
Battery operated systems
Photo voltaic drives
Analog switches
General purpose line drivers
Telecom switches
Absolute Maximum Ratings
Drain-to-Source Voltage
BV
DSS
BV
DGS
±
20V
Drain-to-Gate Voltage
Gate-to-Source Voltage
Operating and Storage Temperature
-55
°
C to +150
°
C
Soldering Temperature*
300
°
C
*
Distance of 1.6 mm from case for 10 seconds.
Note: See Package Outline section for dimensions.
TO-243AA
(SOT-89)
G
D
S
D
Order Number / Package
BV
DSS
/
BV
DGS
240V
R
DS(ON)
(max)
V
GS(th)
(max)
I
D(ON)
(min)
TO-243AA*
Die
6.0
2.0V
1.0A
TN2524N8
TN2524ND
*
Same as SOT-89. Product supplied on 2000 piece carrier tape reels.
MIL visual screening available.
Ordering Information
Product marking for TO-243AA
Where
= 2-week alpha date code
TN5C