參數資料
型號: TPS54140QDRCRQ1
廠商: TEXAS INSTRUMENTS INC
元件分類: 穩壓器
英文描述: SWITCHING REGULATOR, PDSO10
封裝: GREEN, PLASTIC, SON-10
文件頁數: 8/50頁
文件大?。?/td> 1602K
代理商: TPS54140QDRCRQ1
Tss(ms)
Iss( A)
Css(nF) =
Vref (V)
0.8
m
EN
SS/TR
V
SENSE
VOUT
SLVSA24B
– OCTOBER 2009 – REVISED MARCH 2011
DETAILED DESCRIPTION (continued)
Slow Start/Tracking Pin (SS/TR)
The TPS54140 effectively uses the lower voltage of the internal voltage reference or the SS/TR pin voltage as
the power-supply's reference voltage and regulates the output accordingly. A capacitor on the SS/TR pin to
ground implements a slow start time. The TPS54140 has an internal pull-up current source of 2
μA that charges
the external slow start capacitor. The calculations for the slow start time (10% to 90%) are shown in Equation 6.
The voltage reference (VREF) is 0.8 V and the slow start current (ISS) is 2μA. The slow start capacitor should
remain lower than 0.47
μF and greater than 0.47nF.
(6)
At power up, the TPS54140 will not start switching until the slow start pin is discharged to less than 40 mV to
ensure a proper power up, see Figure 31.
Also, during normal operation, the TPS54140 will stop switching and the SS/TR must be discharged to 40 mV,
when the VIN UVLO is exceeded, EN pin pulled below 1.25V, or a thermal shutdown event occurs.
The VSENSE voltage will follow the SS/TR pin voltage with a 45mV offset up to 85% of the internal voltage
reference. When the SS/TR voltage is greater than 85% on the internal reference voltage the offset increases as
the effective system reference transitions from the SS/TR voltage to the internal voltage reference (see
Figure 23). The SS/TR voltage will ramp linearly until clamped at 1.7V.
Figure 31. Operation of SS/TR Pin when Starting
Overload Recovery Circuit
The TPS54140 has an overload recovery (OLR) circuit. The OLR circuit will slow start the output from the
overload voltage to the nominal regulation voltage once the fault condition is removed. The OLR circuit will
discharge the SS/TR pin to a voltage slightly greater than the VSENSE pin voltage using an internal pull down of
100
μA when the error amplifier is changed to a high voltage from a fault condition. When the fault condition is
removed, the output will slow start from the fault voltage to nominal output voltage.
16
Copyright
2009–2011, Texas Instruments Incorporated
Product Folder Link(s): TPS54140-Q1
相關PDF資料
PDF描述
TPS54160DRCT SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10
TPS54160DGQ 2.7 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10
TPS54160DGQR 2.7 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10
TPS5420MDREPG4 5.2 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO8
TPS5420MDREP 5.2 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO8
相關代理商/技術參數
參數描述
TPS54160 制造商:TI 制造商全稱:Texas Instruments 功能描述:1.5-A, 60-V, STEP-DOWN SWIFT DC/DC CONVERTER WITH ECO-MODE
TPS54160_08 制造商:TI 制造商全稱:Texas Instruments 功能描述:1.5-A, 60V STEP DOWN SWIFTa?¢ DC/DC CONVERTER WITH ECO-MODEa?¢
TPS54160_11 制造商:TI 制造商全稱:Texas Instruments 功能描述:1.5-A, 60-V, STEP-DOWN SWIFT DC/DC CONVERTER WITH ECO-MODE
TPS54160A 制造商:TI 制造商全稱:Texas Instruments 功能描述:1.5-A, 60-V, Step-Down SWIFTa?¢ DC/DC Converter with Eco-modea?¢
TPS54160A_13 制造商:TI 制造商全稱:Texas Instruments 功能描述:1.5-A, 60-V, Step-Down SWIFT DC/DC Converter with Eco-mode