• 參數資料
    型號: TRF3750IRGP
    廠商: Texas Instruments
    文件頁數: 17/37頁
    文件大?。?/td> 0K
    描述: IC PLL FREQ SYNTHESIZER 20-VQFN
    標準包裝: 92
    類型: PLL 頻率合成器
    PLL:
    輸入: 時鐘
    輸出: 時鐘
    電路數: 1
    比率 - 輸入:輸出: 2:1
    差分 - 輸入:輸出: 是/無
    頻率 - 最大: 2.4GHz
    除法器/乘法器: 是/無
    電源電壓: 3 V ~ 5.5 V
    工作溫度: -40°C ~ 85°C
    安裝類型: 表面貼裝
    封裝/外殼: 20-VFQFN 裸露焊盤
    供應商設備封裝: 20-QFN 裸露焊盤(4x4)
    包裝: 管件
    產品目錄頁面: 592 (CN2011-ZH PDF)
    配用: TRF3750T-1900EVM-ND - TRF3750T-1900EVM
    TRF3750Q1900EVM-ND - TRF3750Q1900EVM
    296-20836-ND - EVALUATION MOD FOR CDCM7005-QFN
    296-20835-ND - EVALUATION MOD FOR CDCM7005-BGA
    296-20834-ND - EVALUATION MOD FOR CDC7005-QFN
    其它名稱: 296-17552-5
    TRF3750
    SLWS146B MARCH 2004 REVISED AUGUST 2007
    www.ti.com
    24
    Prescaler Selection
    DB22DB23 of the function latch controls the prescaler value for the device. There are four possible settings
    (9/9, 16/17, 32/33, 64/65). For example, setting (DB23, DB22) = (1,0) results in a prescaler choice of 32/33.
    Initialization Latch / Programming After Power Up
    Setting (DB1, DB0) = (1,1) selects the initialization latch. The make-up and programming of the initialization
    latch is identical to that of the function latch. The difference here is that this latch can be used in order to program
    the device at power up. When the initialization latch is programmed, an internal reset occurs at all the counters
    (R, A, B) who become ready to get loaded, assuring that the next time data is loaded for the A and B counters
    the device begins counting efficiently. Subsequent programming of the A and B counters will not, however,
    cause this internal pulse to recur. This pulse is also used to gate the synchronous power down when that mode
    is engaged. As soon as the device exits power down, the counting resumes promptly.
    Alternate Ways of Programming After Power Up
    In addition to the method of using the initialization latch described above, the user can also utilize the CE pin
    to achieve initialization. Since the CE does not halt the operation of the serial port, the user can preprogram
    the counters and as soon as the device is enabled, the counters operate and the device reaches a steady-state
    and functions normally.
    A third option in power up is the counter reset method. The function latch is programmed with the desired data,
    and in addition DB2 (the counter reset bit) is set to 1. The R counter latch is programmed next, followed by the
    N counter latch. Finally, the function latch is programmed again, but this time with a 0 in the bit DB2, disabling
    the counter reset. The charge pump is 3-stated during the reset, but the synchronous power down is not
    triggered.
    Prescaler Resynchronization
    DB22 and DB21 of the R counter latch are used to control the delay (DLY) and resynchronization (SYNC)
    functions of the device. If SYNC is set to 1, then the output of the prescaler is resynchronized with the RF input.
    In addition, if DLY is also 1, the output of the prescaler gets resynchronized with a delayed form of the RF input
    signal. In either case, taking the SYNC to 0 reverts the device to normal operation.
    The use of the SYNC and DLY functionality can improve the device’s phase noise performance by a few dBs.
    It is, however, susceptible to potential malfunction, in case the chosen edge of the RF input coincides with the
    prescaler. This phenomenon may be mitigated by using the DLY function, but is nonetheless unpredictable and
    care should be applied, as fluctuations in temperature, supply and frequency can alter the point at which the
    feature fails to operate. The normal operation of the device calls for both DLY and SYNC to be set to 0, which
    is the way the TRF3750 has been characterized.
    相關PDF資料
    PDF描述
    VI-JTM-MZ-S CONVERTER MOD DC/DC 10V 25W
    VE-2TW-MX-B1 CONVERTER MOD DC/DC 5.5V 75W
    X9317US8IZT1 IC XDCP 100TAP 50K 3-WIRE 8-SOIC
    TRF3750IPW IC SYNTHESIZER PLL FREQ 16-TSSOP
    M83723/73R2028N CONN RCPT 28POS JAM NUT W/SCKT
    相關代理商/技術參數
    參數描述
    TRF3750IRGPG4 功能描述:時鐘合成器/抖動清除器 Hi Perform Integer-N PLL Freq Synthsizr RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
    TRF3750IRGPR 功能描述:時鐘合成器/抖動清除器 High Perf Integer-N PLL Freq Synth RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
    TRF3750IRGPRG4 功能描述:時鐘合成器/抖動清除器 High Perf Integer-N PLL Freq Synth RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
    TRF3750Q1900EVM 功能描述:射頻開發(fā)工具 TRF3750Q1900 Eval Mod RoHS:否 制造商:Taiyo Yuden 產品:Wireless Modules 類型:Wireless Audio 工具用于評估:WYSAAVDX7 頻率: 工作電源電壓:3.4 V to 5.5 V
    TRF3750Q2100EVM 制造商:Texas Instruments 功能描述:TRF3750Q2100 EVAL - Bulk