參數資料
型號: TSM
英文描述: (662.18 k)
中文描述: (662.18十一)
文件頁數: 19/22頁
文件大?。?/td> 662K
代理商: TSM
19
G
It is recommended that the connecting position at the lead of resign-sealed side should be 5 mm
or more from the body of the thermal cutoff.
G
After mounting the thermal cutoff, be careful not to apply force that may pull, push or twist the
lead wires.
G
If using an SF type thermal cutoff, be sure not to make the lead on the resin-sealed side touch
the case. This would cause the current to flow from the lead on the resin-sealed side to the
opposite lead so that the thermal cutoff cannot break the circuit.
Note that the body of the SF type is the same in potential as the circuit. Therefore, it must be
electrically isolated from the other metalic part.
Storage
G
The body and lead A of SF type, and the leads of SM164A and SM182A are silver-plated. There-
fore, these parts may discolor because of sulfuration. In the case, the marking of the body wiII
become difficult to discriminate or the solder-abiIity of lead wiII decline. To avoid this, the SEFUSE
should not keep around materials (such as cardboard or rubber, etc.) which generate sulfurous
acid gas.
G
When the SEFUSE have to be storaged in a cardboard box, the SEFUSE's packs should be put
into other bags (such as polyethylene) and make sure the packs seal.
Recommendation
G
Be careful when mounting the thermal cutoff because external force, heat, or a harmful atmos-
phere (containing excessive humidity or sulfurous acid gas) may damage the characteristics of
the thermal cutoff. If applicable, it is recommended to warn general consumers who are not
aware of the usage cautions for the thermal cutoff not to mount, remove or replace the thermal
cutoff through a note to this effect in the user's manual and other related material.
If you desire any clarifications or explanations regarding these cautions, please call an NEC
sales representative.
The values contained in this document were obtained under certain testing conditions at NEC.
They are not guaranteed and are for reference only.
5 mm or more
5 mm or more
Connecting Position
5 mm or more
Connecting Position
SEFUSE
TM
相關PDF資料
PDF描述
TSG25N100DF TRANSISTOR | IGBT POWER MODULE | INDEPENDENT | 1KV V(BR)CES | 50A I(C)
TSG25N100DV TRANSISTOR | IGBT POWER MODULE | INDEPENDENT | 1KV V(BR)CES | 50A I(C)
TSG8511CP Analog Filter
TSG8511IC Analog Filter
TSG8511IP Analog Filter
相關代理商/技術參數
參數描述
TSM 0505D 制造商:Traco Power 功能描述:CONVERTER DC/DC SMT 1W +/-5V 制造商:Traco Power 功能描述:DC-DC CONV, ISO POL, 2 O/P, 1W, 5V, -5V; DC / DC Converter Type:Isolated POL; DC / DC Converter Output Type:Fixed; Input Voltage DC Min:4.5V; Input Voltage DC Max:5.5V; No. of Outputs:2; Output Voltage Nom.:5V, -5V; Depth:12.7mm ;RoHS Compliant: Yes
TSM 0505D 制造商:Traco Power 功能描述:DC/DC CONVERTER SMT 1W +/-5V
TSM 0505S 制造商:Traco Power 功能描述:CONVERTER DC/DC SMT 1W 5V 制造商:TRACOPOWER 功能描述:CONVERTER, DC/DC, SMT, 1W, 5V 制造商:Traco Power 功能描述:DC-DC CONV, ISO POL, 1 O/P, 1W, 200mA, 5V; DC / DC Converter Type:Isolated POL; DC / DC Converter Output Type:Fixed; Input Voltage DC Min:4.5V; Input Voltage DC Max:5.5V; No. of Outputs:1; Output Voltage Nom.:5V; Output Power Max:1W ;RoHS Compliant: Yes
TSM 0505S 制造商:Traco Power 功能描述:DC/DC CONVERTER SMT 1W 5V
TSM 0509S 制造商:Traco Power 功能描述:CONVERTER DC/DC SMT 1W 9V 制造商:TRACOPOWER 功能描述:CONVERTER, DC/DC, SMT, 1W, 9V 制造商:Traco Power 功能描述:DC-DC CONV, ISO POL, 1 O/P, 1W, 110mA, 9V; DC / DC Converter Type:Isolated POL; DC / DC Converter Output Type:Fixed; Input Voltage DC Min:4.5V; Input Voltage DC Max:5.5V; No. of Outputs:1; Output Voltage Nom.:9V; Output Power Max:1W ;RoHS Compliant: Yes 制造商:Traco Power 功能描述:CONVERTER, DC/DC, SMT, 1W, 9V; DC / DC Converter Type:Isolated POL; DC / DC Converter Output Type:Fixed; Input Voltage DC Min:4.5V; Input Voltage DC Max:5.5V; No. of Outputs:1; Output Voltage Nom.:9V; Output Current Max:110mA; Output;RoHS Compliant: Yes 制造商:Traco Power 功能描述:Module DC-DC 1-OUT 9V 0.11A 1W 8-Pin SOIC