- 您現在的位置：買賣IC網 > PDF目錄140260 > U.FL-LP-5016-A-(35) INTERCONNECTION DEVICE PDF資料下載
參數資料
| 型號： | U.FL-LP-5016-A-(35) |
| 元件分類： | 連接器件 |
| 英文描述： | INTERCONNECTION DEVICE |
| 文件頁數： | 6/6頁 |
| 文件大?。?/td> | 215K |
| 代理商： | U.FL-LP-5016-A-(35) |
6
sUsage precautions
1. Plugs
(1) Connection/
disconnection of
connectors
(2) Permissible load on
the cable after
connector coupling.
(3) Precautions
1) To disconnect connectors, hook the end portion of E.FL-LP-N onto the connector cover and pull off vertically in the
direction of the connector coupling axis.
To remove the connector directly, hold the connector cover and pull off vertically in the direction of the connector
coupling axis. (Please exercise caution so as not to injure fingertips or nails.)
2) To couple the connectors, the coupling axes of both connectors are aligned and the connectors are inserted as
perpendicularly as possible. Do not attempt to insert on an extreme angle.
After the connectors are coupled, do not apply a load to the cable in excess of the values indicated in the diagram
below.
Please note that excessive twisting in the action of insertion or removal will cause damage.
(1) Recommended
temperature profile
(Reference)
Recommended temperature profile (reference)
1) The temperature indicates the printed circuit board surface temperature of the connector lead portion.
2) The reflow soldering method should be performed at a peak temperature of 240C or less at the surface of the
printed circuit board.
3) The temperature profile will change depending on conditions which include such factors as the size of the board,
the solder used, and the solder thickness.
(3) Recommended screen
thickness
0.15 mm
(2) Recommended hand
soldering conditions
(Reference)
Soldering iron temperature: 350C
Soldering time: Within 5 seconds
2. Receptacles
U.FL-LP-040
2N or less
4N or less
U.FL-R-SMT
相關PDF資料 |
PDF描述 |
|---|---|
| UMU-RFSM-P-001 | INTERCONNECTION DEVICE |
| UTPCHP16BU | INTERCONNECTION DEVICE |
| UMU-28M5-P-001 | INTERCONNECTION DEVICE |
| ULCD-20LE-P-001 | INTERCONNECTION DEVICE |
| UE2P1-09TL-P-003 | INTERCONNECTION DEVICE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| UFL-LP-5016-A-L | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:SMT Ultra-Miniature Coaxial Connectors-Mating Heights Owing to the Lowest Profile and the Lightest |
| UFLN124 | 功能描述:鋁質電解電容器 - 帶引線 640UF 250V RoHS:否 制造商:Kemet 引線類型: 電容:220 uF 容差:20 % 電壓額定值:25 V 工作溫度范圍: 端接類型:Radial 外殼直徑:8 mm 外殼長度:11 mm 引線間隔:5 mm 產品:General Purpose Electrolytic Capacitors 封裝:Bulk |
| UFLN132 | 功能描述:鋁質電解電容器 - 帶引線 730UF 250V RoHS:否 制造商:Kemet 引線類型: 電容:220 uF 容差:20 % 電壓額定值:25 V 工作溫度范圍: 端接類型:Radial 外殼直徑:8 mm 外殼長度:11 mm 引線間隔:5 mm 產品:General Purpose Electrolytic Capacitors 封裝:Bulk |
| UFLN154 | 制造商:United Chemi-Con 功能描述:RL812X450 25X67 UCC S7J6A |
| UFLN187 | 制造商:United Chemi-Con 功能描述:CGD250X300X UCC S8G8B |
發(fā)布緊急采購，3分鐘左右您將得到回復。