- 您現在的位置：買賣IC網 > PDF目錄379490 > UPC1934GR-PJG (NEC Corp.) DC-DC CONVERTER CONTROL IC PDF資料下載
參數資料
| 型號： | UPC1934GR-PJG |
| 廠商： | NEC Corp. |
| 元件分類： | DC/DC變換器 |
| 英文描述： | DC-DC CONVERTER CONTROL IC |
| 中文描述： | 的DC - DC轉換器控制IC |
| 文件頁數： | 11/20頁 |
| 文件大?。?/td> | 140K |
| 代理商： | UPC1934GR-PJG |
Data Sheet G13567EJ3V0DS00
11
μ
PC1934
2.3
Under Voltage Lock-out Circuit
The under voltage lock-out circuit prevents malfunctioning of the internal circuits when the supply voltage is low, such as
when the supply voltage is first applied, or when the power supply is interrupted. When the voltage is low, the two output
transistors are cut off at the same time.
2.4
Error Amplifiers
The circuits of the error amplifiers E/A
1
and E/A
2
are exactly the same. The first stage of the error amplifier is a P-
channel MOS transistor input. Be careful of the input voltage ranges (the common mode input voltage ranges are all 0 to
0.4 V (TYP)).
2.5
PWM Comparators
The output ON duty is controlled according to the outputs of the error amplifiers and the voltage input to the Dead Time
Control pin.
A triangular waveform is input to the non-inverted pin, and the error amplifier output and Dead Time Control pin voltage
are input to the inverted pins of the PWM comparators. Therefore, the output transistor ON period is the period when the
triangular waveform is higher than the error amplifier output and Dead Time Control pin voltage (refer to
Timing Charts
).
2.6
Timer Latch-Method Short Circuit Protection Circuit
When the converter outputs either a channel or both channels drop, the FB outputs of the error amplifiers of those
outputs go low. If the FB output goes lower than the timer latch input detection voltage (V
TH
= 0.63 V)), then the output of
the SCP comparator goes low, and Q
1
goes off.
When Q
1
turns OFF, the constant-current supply charges C
DLY
via the DLY pin. The DLY pin is internally connected to a
flip-flop. When the DLY pin voltage reaches the UV detection voltage (V
UV
= 0.8 V (TYP)), the output Q of the flip-flop goes
low, and the output stage of each channel is latched to OFF (refer to
Figure 2-1 Block Diagram
).
Make the power supply voltage briefly less than the reset voltage (V
CCR
, 1.0 V TYP) to reset the latch circuit when the
short-circuit protection circuit has operated.
2.7
Output Circuit
The output circuit has an N-channel open-drain output providing an output withstand voltage of 30 V (absolute maximum
rating), and an output current of 21 mA (absolute maximum rating).
相關PDF資料 |
PDF描述 |
|---|---|
| UPC1934GR-1JG | DC-DC CONVERTER CONTROL IC |
| UPC1934 | RSS Series - Econoline Unregulated DC-DC Converters; Input Voltage (Vdc): 05V; Output Voltage (Vdc): 05V; Power: 1W; 1kVDC and 3kVDC Isolation Options; Approved for Medical Applications; Suitable for Automated Assembly; 8, 10 and 12 pin Pinning Style Options; Optional Continuous Short Circuit Protected; Efficiency to 85% |
| UPC1945TA-E1 | ADJUSTABLE PRECISION SHUNT REGULATORS |
| UPC1945 | ADJUSTABLE PRECISION SHUNT REGULATORS |
| UPC1945TA | ADJUSTABLE PRECISION SHUNT REGULATORS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| UPC1935 | 制造商:NEC 制造商全稱:NEC 功能描述:DC-DC CONVERTER CONTROL IC |
| UPC1935GR | 制造商:NEC 制造商全稱:NEC 功能描述:DC-DC CONVERTER CONTROL IC |
| UPC1943 | 制造商:NEC 制造商全稱:NEC 功能描述:ADJUSTABLE PRECISION SHUNT REGULATORS |
| UPC1943T | 制造商:NEC 制造商全稱:NEC 功能描述:ADJUSTABLE PRECISION SHUNT REGULATORS |
| UPC1943T-E1-AZ | 制造商:Renesas Electronics Corporation 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。