參數資料
型號: UPD16434
廠商: NEC Corp.
英文描述: 1/8, 1/16 DUTY LCD CONTROLLER/DRIVER
中文描述: 1 / 8,1 / 16稅LCD控制器/驅動
文件頁數: 15/64頁
文件大?。?/td> 314K
代理商: UPD16434
Data Sheet S10299EJ4V0DS00
15
μ
PD16434
2.5 Data Memory
The data memory is a static RAM configured by two 50-word
×
8-bit banks. It is used for storing display data.
Figure 2–5. Data Memory Configuration
Bank 0
(50 x 8)
Bank 1
(50 x 8)
00H
31H
00H
31H
The data memory bank is specified by the bank flag in the data pointer, and the address in the bank is specified
by the 6-bit binary counter in the data pointer.
The 8-bit data, written to the serial/parallel interface by the CPU, is used for operation or decoded according to
the specified data processing mode, and is written into the data memory.
The data memory contents can be directly manipulated by a bit manipulation instruction.
When the
μ
PD16434 is set in the read mode, the data memory contents are output to the CPU through the
serial/parallel interface.
The data memory contents are read out in bit units in synchronization with the row drive signal and are sent to the
column driver for driving the LCD. This operation is performed independently from command/data write/read operation
with the CPU, which is performed through the serial/parallel interface. Display data read out operation differs,
depending on the number of time-divisions.
(1) 8-time-division (single/multi-chip configuration)
The contents of the display data in bank 0 or bank 1, whichever is specified by the SMM command, are read
out to the column driver.
Figure 2–6 shows bits correspondence for the row driver and column driver for the data memory. If the data
located at the Rn and Cm intersection is 1, the corresponding LCD dot is ON. If the data is 0, the dot is OFF.
相關PDF資料
PDF描述
UPD72852 MOS INTEGRATED CIRCUIT
UPD72852GB-8EU MOS INTEGRATED CIRCUIT
UPD72870F1 IEEE1394 1-CHIP OHCI HOST CONTROLLER
UPD72870FA2 IEEE1394 1-CHIP OHCI HOST CONTROLLER
UPD72871F1 IEEE1394 1-CHIP OHCI HOST CONTROLLER
相關代理商/技術參數
參數描述
UPD16434G-001-12 制造商:NEC 制造商全稱:NEC 功能描述:1/8, 1/16 DUTY LCD CONTROLLER/DRIVER
UPD16434GF-001-12 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LCD Display Driver
UPD16434GF-001-3B9 制造商:NEC 制造商全稱:NEC 功能描述:1/8, 1/16 DUTY LCD CONTROLLER/DRIVER
UPD16435 制造商:NEC 制造商全稱:NEC 功能描述:DOT MATRIX LCD CONTROLLER/DRIVER
UPD16435A 制造商:NEC 制造商全稱:NEC 功能描述:DOT MATRIX LCD CONTROLLER/DRIVER