參數資料
型號: UPD17149GTA1
廠商: NEC Corp.
英文描述: SMALL, GENERAL-PURPOSE 4-BIT SINGLE-CHIP MICROCONTROLLERS
中文描述: 小,通用4位單晶片微控制器
文件頁數: 43/102頁
文件大?。?/td> 408K
代理商: UPD17149GTA1
43
μ
PD17145(A1), 17147(A1), 17149(A1)
13.3 Watchdog Timer Function
The basic interval timer can also be used as a watchdog timer that detects a program runaway.
13.3.1 Function of watchdog timer
The watchdog timer is a counter that generates a reset signal at fixed time intervals. By inhibiting generation
of this reset signal by program, the system can be reset (started from address 0000H) if the system becomes
runaway due to external noise (if the watchdog timer is not reset within specific time).
This function allows the program to escape from the runaway status because a reset signal is generated at
fixed time intervals even when the program jumps to an unexpected routine and enters an indefinite loop due
to external noise.
13.3.2 Operation of watchdog timer
When WDTEN is set to 1, the 1-bit divider is enabled to operate, and the basic interval timer starts operating
as an 8-bit watchdog timer.
Once the watchdog timer has been started, it cannot be stopped until the device is reset and WDTEN is
cleared to 0.
Reset effected by the watchdog timer can be inhibited in the following two ways:
(1)
(2)
Repeatedly set WDTRES in the program.
Repeatedly set BTMRES in the program.
In the case of (1), WDTRES must be set while the count value of the watchdog timer is 8 to 191 (before it
reaches 192). Therefore, program so that “SET1 WDTRES” is executed at least once in a cycle shorter than
that in which the watchdog timer counts 184.
In the case of (2), BTMRES must be set before the basic interval timer (BTM) counts 128. Therefore, program
so that “SET1 BTMRES” is executed at least once in a cycle shorter than that in which BTM counts 128. In this
case, however, interrupts cannot be processed with BTM.
Caution
BTM is not reset even if WDTEN is set. Therefore, before setting WDTEN first, be sure to
set BTMRES to reset BTM.
Example
SET1 BTMRES
SET2 WDTEN, WDTRES
相關PDF資料
PDF描述
UPD17201A 4-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER AND A/D CONVERTER FOR INFRARED REMOTE CONTROL TRANSMITTERS
UPD17201AGF 4-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER AND A/D CONVERTER FOR INFRARED REMOTE CONTROL TRANSMITTERS
UPD17207 4-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER AND A/D CONVERTER FOR INFRARED REMOTE CONTROL TRANSMITTERS
UPD17207GF 4-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER AND A/D CONVERTER FOR INFRARED REMOTE CONTROL TRANSMITTERS
UPD17202AGF-011 Circular Connector; No. of Contacts:56; Series:MS27467; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:25; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:25-4 RoHS Compliant: No
相關代理商/技術參數
參數描述
UPD1714G 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Consumer IC
UPD1715 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Consumer IC
UPD1716CT 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Consumer IC
UPD1717CU 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC
UPD1718G514 制造商:Panasonic Industrial Company 功能描述:IC