參數資料
型號： UPD750106CU-XXX
廠商： NEC Corp.
英文描述： MICROCONTROLLER|4-BIT|UPD75XL CPU|CMOS|SDIP|42PIN|PLASTIC
中文描述： 單片機| 4位| UPD75XL的CPU |的CMOS | SDIP接插| 42PIN |塑料
文件頁數： 78/80頁
文件大小： 525K
代理商： UPD750106CU-XXX
μ
PD750104, 750106, 750108, 750104(A), 750106(A), 750108(A)
78
NOTES FOR CMOS DEVICES
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note: Strong electric field, when exposed to a MOS device, can cause destruction of
the gate oxide and ultimately degrade the device operation. Steps must be taken
to stop generation of static electricity as much as possible, and quickly dissipate
it once, when it has occurred. Environmental control must be adequate. When
it is dry, humidifier should be used. It is recommended to avoid using insulators
that easily build static electricity. Semiconductor devices must be stored and
transported in an anti-static container, static shielding bag or conductive
material. All test and measurement tools including work bench and floor should
be grounded. The operator should be grounded using wrist strap. Semiconduc-
tor devices must not be touched with bare hands. Similar precautions need to
be taken for PW boards with semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note: No connection for CMOS device inputs can be cause of malfunction. If no
connection is provided to the input pins, it is possible that an internal input level
may be generated due to noise, etc., hence causing malfunction. CMOS device
behave differently than Bipolar or NMOS devices. Input levels of CMOS devices
must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to V
DD
or GND with a resistor, if it is considered to have
a possibility of being an output pin. All handling related to the unused pins must
be judged device by device and related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note: Power-on does not necessarily define initial status of MOS device. Production
process of MOS does not define the initial operation status of the device.
Immediately after the power source is turned ON, the devices with reset function
have not yet been initialized. Hence, power-on does not guarantee out-pin
levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after
power-on for devices having reset function.
相關PDF資料
PDF描述
UPD75036GC DIODE ZENER SINGLE 500mW 47Vz 2.7mA-Izt 0.05 0.1uA-Ir 36Vr DO35-GLASS 5K/AMMO
UPD75036 4 BIT SINGLE-CHIP MICROCOMPUTER
UPD75036CW 4 BIT SINGLE-CHIP MICROCOMPUTER
UPD753036GC DIODE ZENER SINGLE 500mW 47Vz 2.7mA-Izt 0.05 0.1uA-Ir 36Vr DO35-GLASS 5K/REEL
UPD753036GCA DIODE ZENER SINGLE 500mW 60Vz 2.1mA-Izt 0.05 0.1uA-Ir 46Vr DO35-GLASS 5K/REEL
相關代理商/技術參數
參數描述
UPD7507C189 制造商:Panasonic Industrial Company 功能描述:IC
UPD7508CU265 制造商:Panasonic Industrial Company 功能描述:IC
UPD75208 制造商:Panasonic Industrial Company 功能描述:IC
UPD753012AGC-P33-8BT-A 制造商:Renesas Electronics Corporation 功能描述:
UPD753016AGC-P29-8BT 制造商:Renesas Electronics Corporation 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*