• 參數資料
    型號: UPD75P66CS-001
    廠商: NEC Corp.
    英文描述: 4-Bit, Single-Chip, One-Time Programmable (OTP) CMOS Microcomputer With Comparator
    中文描述: 4位,單芯片,一次性可編程(OTP)的CMOS微機與比較
    文件頁數: 39/40頁
    文件大?。?/td> 320K
    代理商: UPD75P66CS-001
    39
    μ
    PD75P048
    NOTES FOR CMOS DEVICES
    1
    PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
    Note: Strong electric field, when exposed to a MOS device, can cause destruction of
    the gate oxide and ultimately degrade the device operation. Steps must be
    taken to stop generation of static electricity as much as possible, and quickly
    dissipate it once, when it has occurred. Environmental control must be
    adequate. When it is dry, humidifier should be used. It is recommended to
    avoid using insulators that easily build static electricity. Semiconductor
    devices must be stored and transported in an anti-static container, static
    shielding bag or conductive material. All test and measurement tools including
    work bench and floor should be grounded. The operator should be grounded
    using wrist strap. Semiconductor devices must not be touched with bare
    hands. Similar precautions need to be taken for PW boards with semiconductor
    devices on it.
    2
    HANDLING OF UNUSED INPUT PINS FOR CMOS
    Note: No connection for CMOS device inputs can be cause of malfunction. If no
    connection is provided to the input pins, it is possible that an internal input
    level may be generated due to noise, etc., hence causing malfunction. CMOS
    devices behave differently than Bipolar or NMOS devices. Input levels of CMOS
    devices must be fixed high or low by using a pull-up or pull-down circuitry. Each
    unused pin should be connected to V
    DD
    or GND with a resistor, if it is considered
    to have a possibility of being an output pin. All handling related to the unused
    pins must be judged device by device and related specifications governing the
    devices.
    3
    STATUS BEFORE INITIALIZATION OF MOS DEVICES
    Note: Power-on does not necessarily define initial status of MOS device. Production
    process of MOS does not define the initial operation status of the device.
    Immediately after the power source is turned ON, the devices with reset
    function have not yet been initialized. Hence, power-on does not guarantee
    out-pin levels, I/O settings or contents of registers. Device is not initialized
    until the reset signal is received. Reset operation must be executed immedi-
    ately after power-on for devices having reset function.
    相關PDF資料
    PDF描述
    UPD75P56CS-012 4-Bit, Single-Chip, One-Time Programmable (OTP) CMOS Microcomputer With Comparator
    UPD75517GF-xxx-3B9 4 BIT SINGLE-CHIP MICROCOMPUTER
    UPD75P3018GK-BE9 4-BIT SINGLE-CHIP MICROCONTROLLER FOR SMALL GENERAL-PURPOSE INFRARED REMOTE CONTROL TRANSMITTER
    UPD75P328 4 BIT SINGLE CHIP MICRO COMPUTER WITH LCD CONTROLLER/ DRIVER AND A/D CONVERTER
    UPD765A Single/Double Density Floppy-Disk Controller
    相關代理商/技術參數
    參數描述
    UPD765AC 制造商:NEC Electronics Corporation 功能描述:DISK CONTROLLER, 40 Pin, DIP
    UPD765AC-2 制造商:NEC Electronics Corporation 功能描述:DISK CONTROLLER, 40 Pin, DIP
    UPD76F0107GC(A)-8EU-A 制造商:Renesas Electronics Corporation 功能描述:
    UPD76F0108GC(A)-UEU-AX 制造商:Renesas Electronics Corporation 功能描述:
    UPD76F0108GC(A)-UEU-SSA-AX 制造商:Renesas Electronics Corporation 功能描述: