參數資料
型號： UPD780024AF1-xxx-CN3
廠商： NEC Corp.
元件分類： 8位微控制器
英文描述： 8-BIT SINGLE-CHIP MICROCONTROLLERS
中文描述： 8位單晶片微控制器
文件頁數： 94/96頁
文件大?。?/td> 661K
代理商： UPD780024AF1-XXX-CN3
94
μ
PD780021A, 780022A, 780023A, 780024A, 780021AY, 780022AY, 780023AY, 780024AY
Data Sheet U14042EJ4V0DS
NOTES FOR CMOS DEVICES
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note:
Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity
as much as possible, and quickly dissipate it once, when it has occurred. Environmental control
must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using
insulators that easily build static electricity. Semiconductor devices must be stored and transported
in an anti-static container, static shielding bag or conductive material. All test and measurement
tools including work bench and floor should be grounded. The operator should be grounded using
wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need
to be taken for PW boards with semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note:
No connection for CMOS device inputs can be cause of malfunction. If no connection is provided
to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence
causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels
of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to V
DD
or GND with a resistor, if it is considered to have a possibility of
being an output pin. All handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note:
Power-on does not necessarily define initial status of MOS device. Production process of MOS
does not define the initial operation status of the device. Immediately after the power source is
turned ON, the devices with reset function have not yet been initialized. Hence, power-on does
not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after power-on for devices
having reset function.
Note: Purchase of NEC Electronics l
2
C components conveys a license under the Philips I
2
C Patent Rights
to use these components in an I
2
C system, provided that the system conforms to the I
2
C Standard
Specification as defined by Philips.
FIP and IEBus are trademarks of NEC Electronics Corporation.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United Status
and/ or other countries.
PC/AT is a trademark of International Business Machines Corporation.
HP9000 series 700 and HP-UX are trademarks of Hewlett-Packard Company.
SPARCstation is a trademark of SPARC International, Inc.
Solaris and SunOS are trademarks of Sun Microsystems, Inc.
相關PDF資料
PDF描述
UPD780024AGC-xxx-8BS 8-BIT SINGLE-CHIP MICROCONTROLLERS
UPD780024AGC-xxx-AB8 8-BIT SINGLE-CHIP MICROCONTROLLERS
UPD780024AGK-xxx-9ET 8-BIT SINGLE-CHIP MICROCONTROLLERS
UPD78324LP 16/8-BIT SINGLE-CHIP MICROCONTROLLER
UPD78323GJ-5BJ 16/8-BIT SINGLE-CHIP MICROCONTROLLER
相關代理商/技術參數
參數描述
UPD780024AGK-C42-9ET 制造商:Renesas Electronics Corporation 功能描述:
UPD780024AGK-C93-9ET 制造商:Renesas Electronics Corporation 功能描述:
UPD780033AGK-B03-9ET 制造商:Renesas Electronics Corporation 功能描述:
UPD780033AGK-B03-9ET-A 制造商:Renesas Electronics Corporation 功能描述:
UPD780034AGC-119-8BS-A 制造商:Renesas Electronics Corporation 功能描述:NECUPD780034AGC-119-8BS-A MCU
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*