![](http://datasheet.mmic.net.cn/Renesas-Electronics-America/UPD78F1156AGC-GAD-AX_datasheet_99856/UPD78F1156AGC-GAD-AX_803.png)
CHAPTER 29 ELECTRICAL SPECIFICATIONS ((A) GRADE PRODUCTS)
User’s Manual U17893EJ8V0UD
801
(A) Grade Products
DC Characteristics (11/12)
(TA =
40 to +85°C, 1.8 V ≤ VDD = EVDD ≤ 5.5 V, 1.8 V ≤ AVREF0 ≤ VDD, 1.8 V ≤ AVREF1 ≤ VDD, VSS = EVSS
= AVSS = 0 V)
Parameter
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
VDD = 5.0 V
2.2
14.0
μA
VDD = 3.0 V
2.2
14.0
μA
fSUB = 32.768 kHz
Note 2,
TA =
40 to +70 °C
VDD = 2.0 V
2.1
13.8
μA
VDD = 5.0 V
2.2
21.0
μA
VDD = 3.0 V
2.2
21.0
μA
IDD2
Note 1
HALT
mode
fSUB = 32.768 kHz
Note 2,
TA =
40 to +85 °C
VDD = 2.0 V
2.1
20.8
μA
TA =
40 to +70 °C
1.1
9.0
μA
Supply
current
IDD3
Note 3
STOP
mode
TA =
40 to +85 °C
1.1
16.0
μA
Notes 1. Total current flowing into VDD, EVDD, AVREF0, and AVREF1, including the input leakage current flowing when
the level of the input pin is fixed to VDD or VSS. The maximum value include the peripheral operation current.
However, not including the current flowing into the A/D converter, D/A converter, LVI circuit, I/O port, and
on-chip pull-up/pull-down resistors. During HALT instruction execution by flash memory.
2. When internal high-speed oscillator and high-speed system clock are stopped. When watchdog timer is
stopped.
3. Total current flowing into VDD, EVDD, AVREF0, and AVREF1, including the input leakage current flowing when
the level of the input pin is fixed to VDD or VSS. When subsystem clock is stopped. When watchdog timer is
stopped.
Remarks 1. fSUB : Subsystem clock frequency (XT1 clock oscillation frequency)
2. Temperature condition of the TYP. value is TA = 25°C
<R>