參數資料
型號: V42MLA1206
廠商: Littelfuse, Inc.
英文描述: Multilayer Transient Voltage Surge Suppressors
中文描述: 多層瞬態電壓浪涌抑制器
文件頁數: 7/11頁
文件大小: 254K
代理商: V42MLA1206
Multilayer Transient Voltage Surge Suppressors
ML Varistor Series
Surface Mount Varistors
146
www.littelfuse.com
Device Characteristics
At low current levels, the V-I curve of the multilayer transient voltage
suppressor approaches a linear (ohmic) relationship and shows a
temperature dependent effect (Figure 10). At or below the maximum
working voltage, the suppressor is in a high resistance mode (approach-
ing 10
6
at its maximum rated working voltage). Leakage currents at
maximum rated voltage are below 50μA, typically 25μA; for 0402 size
below 10μA, typically 5μA.
Speed of Response
The Multilayer Suppressor is a leadless device. Its response time is not
limited by the parasitic lead inductances found in other surface mount
packages.The response time of the Zinc Oxide dielectric material is less
than 1 nanosecond and the ML can clamp very fast dV/dT events such
as ESD. Additionally, in
real world
applications, the associated circuit
wiring is often the greatest factor effecting speed of response.Therefore,
transient suppressor placement within a circuit can be considered
important in certain instances.
100%
1E
-9
1E
-8
SUPPRESSOR CURRENT (A
DC
)
10%
1E
-7
1E
-6
1E
-5
1E
-4
1E
-3
1E
-2
25
50
75
100
125
o
C
S
V
N
o
C
FIGURE 10. TYPICAL TEMPERATURE DEPENDANCE OF THE CHARACTERISTIC
CURVE IN THE LEAKAGE REGION
o
o
o
o
GRAINS
DEPLETION
REGION
FIRED CERAMIC
DIELECTRIC
METAL
ELECTRODES
DEPLETION
REGION
METAL END
TERMINATION
FIGURE 11. MULTILAYER INTERNAL CONSTRUCTION
Energy Absorption/Peak Current Capability
Energy dissipated within the ML is calculated by multiplying the clamping
voltage, transient current and transient duration. An important advantage
of the multilayer is its interdigitated electrode construction within the mass
of dielectric material.This results in excellent current distribution and the
peak temperature per energy absorbed is very low.The matrix of semicon-
ducting grains combine to absorb and distribute transient energy (heat)
(Figure 11).This dramatically reduces peak temperature; thermal stresses
and enhances device reliability.
As a measure of the device capability in energy and peak current
handling, the V26MLA1206A part was tested with multiple pulses at its
peak current rating (150A, 8/20μs). At the end of the test, 10,000 pulses
later, the device voltage characteristics are still well within specification
(Figure 13).
100
10
20
V26MLA1206
40
60
80
100
120
140
TEMPERATURE (
o
C)
C
V5.5MLA1206
0
-20
-40
-60
FIGURE 12. CLAMPING VOLTAGE OVER TEMPERATURE
(V
C
AT 10A)
100
10
0
V26MLA1206
2000
4000
6000
8000
10000
12000
NUMBER OF PULSES
V
FIGURE 13.
REPETITIVE PULSE CAPABILITY
PEAK CURRENT = 150A
8/20
μ
s DURATION, 30s BETWEEN PULSES
Next
Previous
相關PDF資料
PDF描述
V430CH8 Surface Mount Varistors - Transient Voltage Surge Suppressor
V430MA3A Varistor Products - Axial Lead
V430RA16 Varistor Products - Low Profile
V436416S04VCTG-75 3.3 VOLT 16M x 64 HIGH PERFORMANCE PC133 UNBUFFERED SDRAM MODULE
V436416S04VTG 3.3 Volt 16M x 64 High Performance PC100 and 100 MHZ SDRAM Module with Unbuffered(3.3V 16M*64位高性能無緩沖器PC100和100MHZSDRAM模塊)
相關代理商/技術參數
參數描述
V42MLA1206A 功能描述:壓敏電阻 42V 180A 425pF RoHS:否 制造商:EPCOS 產品:MLV 電壓額定值 DC:22 V 電壓額定值 AC:17 V 鉗位電壓:50 V 直徑: 峰值浪涌電流:30 A 浪涌能量額定值:75 mJ 電容:74.2 pF 工作溫度范圍:- 55 C to + 125 C 安裝:SMD/SMT 封裝:Reel
V42MLA1206H 功能描述:壓敏電阻 42V 180A 425pF RoHS:否 制造商:EPCOS 產品:MLV 電壓額定值 DC:22 V 電壓額定值 AC:17 V 鉗位電壓:50 V 直徑: 峰值浪涌電流:30 A 浪涌能量額定值:75 mJ 電容:74.2 pF 工作溫度范圍:- 55 C to + 125 C 安裝:SMD/SMT 封裝:Reel
V42MLA1206H 制造商:Littelfuse 功能描述:VARISTOR 1206 42VAC
V42MLA1206H-CUT TAPE 制造商:LITTELFUSE 功能描述:ML Series 42 VDC 30 V RMS 92 V Clamp 180 A 425 pF Surface Mount Varistor
V42MLA1206N 制造商:LITTELFUSE 制造商全稱:Littelfuse 功能描述:Surface Mount Multilayer Varistors (MLVs)