- 您現在的位置：買賣IC網 > PDF目錄297727 > VCO-600A@311.040MHZ (VECTRON INTERNATIONAL) VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 311.04 MHz PDF資料下載
參數資料
| 型號： | VCO-600A@311.040MHZ |
| 廠商： | VECTRON INTERNATIONAL |
| 元件分類： | XO, clock |
| 英文描述： | VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 311.04 MHz |
| 封裝： | MINIATURE, CERAMIC, SO-28 |
| 文件頁數： | 3/6頁 |
| 文件大?。?/td> | 117K |
| 代理商： | VCO-600A@311.040MHZ |
VCO-600A Voltage Controlled SAW Oscillator
Vectron International 267 Lowell Rd, Hudson NH 03051-4916
Tel:1-88-VECTRON-1
e-mail vectron@vectron.com
3
Figure 1. PECL Operation
Figure 2. ECL Operation
1. By setting OD low, a test signal may be applied at CLKIN and fed through the VCO-600A to both the CLKOUT and CLKOUT to facilitate on board
testing. The test signal input applied at CLKIN may be either an ECL or sinewave input (up to 1Vpp, AC coupled). CLKIN is biased internally to
VBB (Vcc-1.3V)
2. An optional capacitor to ground can be placed on VBW to reduce the modulation bandwidth for narrow bandwidth phase-lock loop applications. The
modulation bandwidth will be approximately 1/(12000*C) Hz, where C is equal to the capacitance in Farads. If the optional capacitor is not utilized, VBW
becomes a no connect (NC) and the modulation bandwidth will be approximately equal to the nominal device frequency
÷1200.
3. By setting OD low, the outputs are disabled and CLKOUT is held Low while CLKOUT is held High. The threshold for OD is 1.4V above VEE. OD
should not be driven above mid supply and during normal operation, should be left floating (use with an open collector or 3-State gate for interfacing with
standard logic). If the OD feature is used during normal operation, then CLKIN should be tied through 10K
to GND to avoid any possibility of chatter on
the CLKOUT outputs
17
VEE
VCO-600A
OUT
Control Voltage
OUT
Output Disable
Test Clock In
VCC Ground
-2V, 50ohms
-5 V
-4.5 to -0.5V
10
19
21
4
2,12,27
1,3,9,11,13,14,15,16,18,20,22,24,26,28
17
VCC
VCO-600A
OUT
Control Voltage
OUT
Output Disable
Test Clock In
VEE Ground
+3V, 50ohms
+5 V
0.5 to 4.5V
2,12,27
19
21
4
10
1,3,9,11,13,14,15,16,18,20,22,24,26,28
23
25
23
25
Optional
Capacitor
Reduces
Bandwidth
Optional
Capacitor
Reduces
Bandwidth
相關PDF資料 |
PDF描述 |
|---|---|
| VCO190-1007U(Y) | VCO, 994 MHz - 1019 MHz |
| VCO190-1050T(Y) | VCO, 1030 MHz - 1070 MHz |
| VCO190-1050T(Y) | VCO, 1030 MHz - 1070 MHz |
| VCO190-1067U | VCO, 1049 MHz - 1085 MHz |
| VCO190-1068T(Y) | VCO, 1055 MHz - 1080 MHz |
相關代理商/技術參數 |
參數描述 |
|---|---|
| VCO600A368.640MHZ | 制造商:VECTRON 制造商全稱:Vectron International, Inc 功能描述:Voltage Controlled Saw Oscillator |
| VCO600A622.080MHZ | 制造商:VECTRON 制造商全稱:Vectron International, Inc 功能描述:Voltage Controlled Saw Oscillator |
| VCO600A-622.080MHZ | 制造商:Vectron International 功能描述:VOLTAGE CONTROLLED CLOCK SAW OSCILLATOR, 622.08 MHz |
| VCO600A666.5143MHZ | 制造商:VECTRON 制造商全稱:Vectron International, Inc 功能描述:Voltage Controlled Saw Oscillator |
| VCO600A-SERIES | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Peripheral IC |
發布緊急采購，3分鐘左右您將得到回復。