參數(shù)資料
型號: VSC7961
廠商: Vitesse Semiconductor Corporation.
元件分類: 限幅放大器
英文描述: 3.125Gb/s PECL Limiting Amplifier with LOS Detect
中文描述: 3.125Gb / s的PECL的限幅放大器與LOS檢測
文件頁數(shù): 7/10頁
文件大小: 95K
代理商: VSC7961
VITESSE
Advance Product Information
VSC7961
3.125Gb/s PECL Limiting Amplifier with LOS Detect
G52360-0, Rev 2.0
02/09/01
Page 7
VITESSE
SEMICONDUCTOR CORPORATION
741 Calle Plano
Camarillo, CA 93012
Tel: (800) VITESSE
FAX: (805) 987-5896
Email: prodinfo@vitesse.com
Internet: www.vitesse.com
Detailed Description
The VSC7961 is a high-speed limiting amplifier with Loss of Signal (LOS) detect. The device is designed
to operate with a 3.3V or 5V supply in SDH/SONET and Fibre Channel applications up to 3.125Gb/s. The
VSC7961 has positive emitter-coupled logic (PECL) outputs. The VSC7959 provides the same functionality as
the VSC7961 with current-mode logic (CML) outputs. The key features of the VSC7961 are Loss-of-Signal
(LOS) detect, output offset correction, output squelch, low power supply current, and fast rise and fall times.
The inputs of the device provide 100
input impedance between IN+ and IN- and are intended to be DC-
coupled. The PECL output circuits should be terminated through 50
to V
CC
- 2V.
Loss of Signal (LOS) Detect
This feature utilizes an rms power detector with programmable LOS indicator to provide two outputs, LOS
and LOS. The input TH is used to set the threshold at which the loss of signal detector outputs, LOS and LOS,
change state. See Loss of Signal Specifications (Table 3) for setting the resistor value between TH and ground.
The Loss-of-Signal Truth Table (Table 4) clarifies how LOS and SQUELCH interact.
Optional Squelch
Squelch is disabled when SQUELCH is not connected or is set to TTL low level. When SQUELCH is set to
TTL high level and LOS is asserted, the data outputs, OUT+ and OUT- are forced to static levels. If LOS is not
asserted, the outputs will not be squelched.
Offset Correction
This feature is provided to ensure that the offsets in the amplifier coupled with its gain do not cause the out-
put buffer to give a false output. Because of the high gain of the amplifier, offset correction using a low-fre-
quency feedback loop reduces input offset. If no component is placed between pins CZ1 and CZ2, the low
frequency cut-off is 2MHz. If a 0.1
μ
F capacitor is placed between CZ1 and CZ2, the low frequency cut-off is
lowered to about 2kHz. For Fibre Channel and Gigabit Ethernet applications, leave pins CZ1 and CZ2 open. For
ATM/SONET and other scrambled non-return-to-zero (NRZ) applications, place a 0.1
μ
F capacitor between
CZ1 and CZ2. This maintains a one-decade separation between the lowest input frequency and the low fre-
quency cut-off. The low frequency cut-off of the offset correction loop is given by the following equation:
f
OC
= 43 / [2
π
* 35k (C
Z
+ 100pF)]
= 196* 10
-6
/ (C
Z
+ 100pF)
= 196* 10
-6
/ (0.1
μ
F + 100pF)
= 1.96kHz
相關PDF資料
PDF描述
VSC7961W BOX AA CELL REMOTE ALMOND
VSC7961YD 3.125Gb/s PECL Limiting Amplifier with LOS Detect
VSC7964 1/2/4 Gbps Integrated VCSEL Driver and Limiting Amplifier
VSC7965 PON Integrated 155 Mbps to 1.25 Gbps Burst-mode Laser Driver and Limiting Amplifier
VSC7966 155 Mbps to 1.25 Gbps Laser Driver and Post Amplifier
相關代理商/技術參數(shù)
參數(shù)描述
VSC7961W 制造商:VITESSE 制造商全稱:Vitesse Semiconductor Corporation 功能描述:3.125Gb/s PECL Limiting Amplifier with LOS Detect
VSC7961YD 制造商:VITESSE 制造商全稱:Vitesse Semiconductor Corporation 功能描述:3.125Gb/s PECL Limiting Amplifier with LOS Detect
VSC7964 制造商:VITESSE 制造商全稱:Vitesse Semiconductor Corporation 功能描述:1/2/4 Gbps Integrated VCSEL Driver and Limiting Amplifier
VSC7965 制造商:VITESSE 制造商全稱:Vitesse Semiconductor Corporation 功能描述:PON Integrated 155 Mbps to 1.25 Gbps Burst-mode Laser Driver and Limiting Amplifier
VSC7966 制造商:VITESSE 制造商全稱:Vitesse Semiconductor Corporation 功能描述:155 Mbps to 1.25 Gbps Laser Driver and Post Amplifier