參數資料
型號： W65C816SP10
英文描述： Microprocessor
中文描述： 微處理器
文件頁數： 17/62頁
文件大?。?/td> 891K
代理商： W65C816SP10
WESTERN DESIGN CENTER
W65C816S
March 1, 2000
17
2.9
Non-Maskable Interrupt (NMIB)
A negative transition on the NMIB input initiates an interrupt sequence. A high-to-low transition initiates an
interrupt sequence after the current instruction is completed. The Wait for Interrupt (WAI) instruction may be
executed to ensure that the interrupt will be recognized immediately. The Non-Maskable Interrupt vector address
is 00FFFA,B (Emulation mode) or 00FFEA,B (Native mode). Since NMIB is an edge-sensitive input, an
interrupt will occur if there is a negative transition while servicing a previous interrupt. Also, no interrupt will
occur if NMIB remains low. The NMIB signal going low causes 3 bytes of information to be pushed onto the
stack before jumping to the interrupt handler. The first byte is the high byte in the Program Counter. The second
byte is the Program Counter low byte. The third byte is the status register valve. These valves are used to return
the processor to it's original state prior to the NMI interrupt.
2.10
Phase 2 In (PHI2)
This is the system clock input to the microprocessor internal clock generator (equivalent to PHI0(IN) on the
6502). During the low power Standby Mode, PHI2 can be held in either state to preserve the contents of internal
registers.
2.11
Read/Write (RWB)
When the RWB output signal is in the high state, the microprocessor is reading data from memory or I/O. When
in the low state, the Data Bus contains valid data from the microprocessor which is to be stored at the addressed
memory location. When using the W65C816S, the RWB signal may be set to the high impedance state by Bus
Enable (BE).
2.12
Ready (RDY)
This bi-directional signal indicates that a Wait for Interrupt (WAI) instruction has been executed allowing the
user to halt operation of the microprocessor. A low input logic level will halt the microprocessor in its current
state. Returning RDY to the active high state allows the microprocessor to continue following the next Phase 2 In
Clock negative transition. The RDY signal is internally pulled low following the execution of a Wait for
Interrupt (WAI) instruction, and then returned to the high state when a RESB, ABORTB, NMIB, or IRQB
external interrupt is provided. This feature may be used to eliminate interrupt latency by placing the WAI
instruction at the beginning of the IRQB servicing routine. If the IRQB Disable flag has been set, the next
instruction will be executed when the IRQB occurs. The processor will not stop after a WAI instruction if RDY
has been forced to a high state. The Stop (STP) instruction has no effect on RDY. The RDY pin has an active
pull-up. When outputting a low level, the pull-up is disabled. The RDY pin can still be wired ORed.
相關PDF資料
PDF描述
W65C816SP-14 16-Bit Microprocessor
W65C816SPL10 Microprocessor
W65C816SPL-14 16-Bit Microprocessor
W65C816SQ10 Microprocessor
W65C816SQ-14 16-Bit Microprocessor
相關代理商/技術參數
參數描述
W65C816SP-14 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microprocessor
W65C816SPL10 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microprocessor
W65C816SPL-14 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microprocessor
W65C816SQ10 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microprocessor
W65C816SQ-14 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microprocessor
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*