- 您現在的位置：買賣IC網 > PDF目錄371280 > X9241WPM Bridge Rectifier Module; Phases:Three; Repetitive Reverse Voltage Max, Vrrm:1200V; Forward Voltage Max, VF:1.6V; Package/Case:G15; Current, Ifs max:750A; Current, Ifsm:600A; Leaded Process Compatible:No PDF資料下載
參數資料
| 型號： | X9241WPM |
| 英文描述： | Bridge Rectifier Module; Phases:Three; Repetitive Reverse Voltage Max, Vrrm:1200V; Forward Voltage Max, VF:1.6V; Package/Case:G15; Current, Ifs max:750A; Current, Ifsm:600A; Leaded Process Compatible:No |
| 中文描述： | 四E2POT⑩非易失數字電位器 |
| 文件頁數： | 8/16頁 |
| 文件大?。?/td> | 76K |
| 代理商： | X9241WPM |
8
X9241
Cascade Mode
The X9241 provides a mechanism for cascading the
arrays. That is, the sixty-three resistor elements of one
array may be cascaded (linked) with the resistor ele-
ments of an adjacent array.
Cascade Control Bits
The data byte, for the three-byte commands, contains 6
bits (LSBs) for defining the wiper position plus two high
order bits, CM (Cascade Mode) and DW (Disable Wiper).
The state of CM enables or disables (normal operation)
cascade mode. When the CM bit of the WCR is set to “0”
the potentiometer is in the normal operation mode.
When the CM bit of the WCR is set to “1” the potentiometer
is cascaded with its adjacent higher order potentiometer.
For example; if bit 7 of WCR2 is set to “1”, pot 2 will be
cascaded to pot 3.
The state of DW enables or disables the wiper. When the
Figure 9. Cascading Arrays
DW bit of the WCR is set to “0” the wiper is enabled;
when set to “1” the wiper is disabled. If the wiper is
disabled, the wiper terminal will be electrically isolated
and float.
When operating in cascade mode VH, VL and the wiper
terminals of the cascaded arrays must be electrically
connected externally. All but one of the wipers must be
disabled. The user can alter the wiper position by writing
directly to the WCR or indirectly by transferring the
contents of the data registers to the WCR or by using the
Increment/Decrement command.
When using the Increment/Decrement command the
wiper position will automatically transition between
arrays. The current position of the wiper can be deter-
mined by reading the WCR registers; if the DW bit is “0”,
the wiper in that array is active. If the current wiper
position is to be maintained, a global XFR WCR to Data
Register command must be issued before power-down.
3864 ILL F16.1
VH0
VL0
VW0
VL1
VH1
VW1
VL2
VH2
VW2
VL3
VH3
VW3
POT 0
WCR0
POT 1
WCR1
POT 2
WCR2
POT 3
WCR3
EXTERNAL
CONNECTION
=
相關PDF資料 |
PDF描述 |
|---|---|
| X9241WS | Bridge Rectifier; Phases:Three; Repetitive Reverse Voltage Max, Vrrm:1600V; Forward Current Avg Rectified, IF(AV):150A; Forward Voltage Max, VF:1.6V; Package/Case:G14; Forward Current:150A; Forward Voltage:1.6V |
| X9241WSM | Quad E2POT⑩ Nonvolatile Digital Potentiometer |
| X9241WV | Quad E2POT⑩ Nonvolatile Digital Potentiometer |
| X9241YP | Bridge Rectifier; Phases:Three; Repetitive Reverse Voltage Max, Vrrm:1600V; Forward Current Avg Rectified, IF(AV):150A; Forward Voltage Max, VF:1.6V; Package/Case:G18; Forward Current:150A; Forward Voltage:1.6V |
| X9241YS | Quad E2POT⑩ Nonvolatile Digital Potentiometer |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X9241WS | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Quad E2POT⑩ Nonvolatile Digital Potentiometer |
| X9241WSI | 制造商:Intersil Corporation 功能描述: |
| X9241WSM | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Quad E2POT⑩ Nonvolatile Digital Potentiometer |
| X9241WV | 制造商:Intersil Corporation 功能描述: |
| X9241WVI | 制造商:Intersil Corporation 功能描述: 制造商:XICOR 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。