- 您現在的位置：買賣IC網 > PDF目錄1972 > X9318WS8T1 (Intersil)IC XDCP 100-TAP 10K 8-SOIC PDF資料下載
參數資料
| 型號： | X9318WS8T1 |
| 廠商： | Intersil |
| 文件頁數： | 7/10頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC XDCP 100-TAP 10K 8-SOIC |
| 標準包裝： | 2,500 |
| 系列： | XDCP™ |
| 接片： | 100 |
| 電阻（歐姆）： | 10k |
| 電路數： | 1 |
| 溫度系數： | 標準值 ±300 ppm/°C |
| 存儲器類型： | 非易失 |
| 接口： | 3 線串行（芯片選擇，遞增，增/減） |
| 電源電壓： | 4.5 V ~ 5.5 V |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 8-SOIC |
| 包裝： | 帶卷 (TR) |
6
FN8184.1
September 14, 2005
PIN DESCRIPTIONS
RH and RL
The high (RH) and low (RL) terminals of the X9318 are
equivalent to the fixed terminals of a mechanical
potentiometer. The terminology of RL and RH refer-
ences the relative position of the terminal in relation to
wiper movement direction selected by the U/D input
and not the voltage potential on the terminal.
R
W
Rw is the wiper terminal and is equivalent to the mov-
able terminal of a mechanical potentiometer. The posi-
tion of the wiper within the array is determined by the
control inputs. The wiper terminal series resistance is
typically 40
.
Up/Down (U/D)
The U/D input controls the direction of the wiper move-
ment and whether the counter is incremented or dec-
remented.
Increment (INC)
The INC input is negative-edge triggered. Toggling
INC will move the wiper and either increment or decre-
ment the counter in the direction indicated by the logic
level on the U/D input.
Chip Select (CS)
The device is selected when the CS input is LOW. The
current counter value is stored in nonvolatile memory
when CS is returned HIGH while the INC input is also
HIGH. After the store operation is complete the X9318
will be placed in the low power standby mode until the
device is selected once again.
PIN CONFIGURATION
PIN NAMES
PRINCIPLES OF OPERATION
There are three sections of the X9318: the control
section, the nonvolatile memory, and the resistor
array. The control section operates just like an
up/down counter. The output of this counter is
decoded to turn on a single electronic switch
connecting a point on the resistor array to the wiper
output. The contents of the counter can be stored in
nonvolatile memory and retained for future use. The
resistor array is comprised of 99 individual resistors
connected in series. Electronic switches at either end
of the array and between each resistor provide an
electrical connection to the wiper pin, RW.
The wiper acts like its mechanical equivalent and does
not move beyond the first or last position. That is, the
counter does not wrap around when clocked to either
extreme.
The electronic switches on the device operate in a
“make before break” mode when the wiper changes
tap positions. If the wiper is moved several positions,
multiple taps are connected to the wiper for tIW (INC to
VW change). The RTOTAL value for the device can
temporarily be reduced by a significant amount if the
wiper is moved several positions.
When the device is powered-down, the last wiper posi-
tion stored will be maintained in the nonvolatile mem-
ory. When power is restored, the contents of the
memory are recalled and the wiper is set to the value
last stored.
RH
VCC
INC
U/D
1
2
3
4
8
7
6
5
X9318
DIP/SOIC
VSS
CS
RL
RW
Symbol
Description
RH
High terminal
RW
Wiper terminal
RL
Low terminal
VSS
Ground
VCC
Supply voltage
U/D
Up/Down control input
INC
Increment control input
CS
Chip select control input
X9318
相關PDF資料 |
PDF描述 |
|---|---|
| X9319UP8I | IC DIGITAL POT 50K 100TAP 8-DIP |
| X93254UV14I-3 | IC DCP DUAL 50K 32TAP 14-TSSOP |
| X93255UV14IT1 | IC XDCP DUAL 32-TAP 50K 14-TSSOP |
| X93256WV14I-2.7T1 | IC XDCP DUAL 32TAP 12.5K 14TSSOP |
| X9400YV24T1 | IC XDCP QUAD 64-TAP 2.5K 24TSSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X9318WS8Z | 功能描述:IC POT DGTL 10K OHM 8-SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 35 ppm/°C 存儲器類型:非易失 接口:3 線串口 電源電壓:2.7 V ~ 5.25 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WDFN 裸露焊盤 供應商設備封裝:8-TDFN-EP（3x3） 包裝:剪切帶 (CT) 產品目錄頁面:1399 (CN2011-ZH PDF) 其它名稱:MAX5423ETA+TCT |
| X9318WS8ZT1 | 功能描述:IC XDCP 100-TAP 10K 8-SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 接片:256 電阻（歐姆）:100k 電路數:2 溫度系數:標準值 35 ppm/°C 存儲器類型:易失 接口:6 線串行（芯片選擇，遞增，增/減） 電源電壓:2.6 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
| X9319 | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Digitally Controlled Potentiometer (XDCP) |
| X9319_06 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Digitally Controlled Potentiometer |
| X9319UP8 | 功能描述:IC DIGITAL POT 50K 100TAP 8-DIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
發布緊急采購，3分鐘左右您將得到回復。