參數資料
型號: X9438WP24-2.7
廠商: INTERSIL CORP
元件分類: 數字電位計
英文描述: RECTIFIER BRIDGE 1A 200V 50A-ifsm 1.1V-vf 10uA-ir DFM 50/TUBE
中文描述: DUAL 10K DIGITAL POTENTIOMETER, 2-WIRE SERIAL CONTROL INTERFACE, 64 POSITIONS, PDIP24
封裝: PLASTIC, DIP-24
文件頁數: 8/18頁
文件大?。?/td> 280K
代理商: X9438WP24-2.7
8
FN8199.0
March 11, 2005
REGISTER OPERATION
Both digitally controlled potentiometers share the
serial interface and share a common architecture.
Each potentiometer is associated with a Wiper
Counter Register (WCR), and four Data Registers.
Figure 7 illustrates the control, registers, and system
features of the device.
Figure 7. System Block Diagram
Wiper Counter (WCR) and Analog Control Registers
(ACR)
The X9438 contains two wiper counter registers, one
for each XDCP. The wiper counter register is equiva-
lent to a serial-in, parallel-out counter, with its outputs
decoded to select one of sixty-four switches along its
resistor array. The contents of the wiper counter regis-
ter can be altered in four ways: it may be written
directly by the host via the write WCR Instruction
(serial load); it may be written indirectly by transferring
the contents of one of four associated data registers
(DR) via the XFR data register instruction (parallel
load); it can be modified one step at a time by the
increment/decrement instruction (WCR only). Finally,
it is loaded with the contents of its data register zero
(R0) upon power-up.
The wiper counter register is a volatile register; that is,
its contents are lost when the X9438 is powered-down.
Although the registers are automatically loaded with the
value in R0 upon power-up, it should be noted this may
be different from the value present at power-down.
Data Registers (DR)
Each potentiometer has four non-volatile data registers
(DR). These can be read or written directly by the host
and data can be transferred between any of the four
data registers and the WCR. It should be noted all oper-
ations changing data in one of these registers is a non-
volatile operation and will take a maximum of 10ms.
If the application does not require storage of multiple
settings for the potentiometer, these registers can be
used as regular memory locations that could store sys-
tem parameters or user preference data.
REGISTER DESCRIPTIONS AND MEMORY MAP
Memory Map
Wiper Counter Register (WCR)
WP0-WP5 identify wiper position.
Data Registers (DR, R0 - R3)
V
OUT (0,1)
(DR0-DR3)
0,1
Interface
and
Control
Circuitry
SCL
SDA
A0
A1
A2
A3
V
H (0,1)
V
L (0,1)
WP
V
W (0,1)
V
INV (0,1)
V
NI (0,1)
+
WCR
0,1
WCRO
DR0
DR1
DR2
DR3
WCR1
DR0
DR1
DR2
DR3
0
0
WP5 WP4 WP3 WP2 WP1
(volatile)
WP0
(LSB)
Wiper Position or User Data
(Nonvolatile)
X9438
相關PDF資料
PDF描述
X9438WP24I Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
X9438WP24I-2.7 Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
X9438WS24 Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
X9438WS24-2.7 Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
X9438WS24I Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
相關代理商/技術參數
參數描述
X9438WP24I 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
X9438WP24I-2.7 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
X9438WS24 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
X9438WS24-2.7 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier
X9438WS24I 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometer (XDCP) with Operational Amplifier