- 您現在的位置：買賣IC網 > PDF目錄376448 > X9455TV24I-2.7 (INTERSIL CORP) Dual Two-wiper Digitally-Controlled (XDCP) Potentiometer PDF資料下載
參數資料
| 型號： | X9455TV24I-2.7 |
| 廠商： | INTERSIL CORP |
| 元件分類： | 數字電位計 |
| 英文描述： | Dual Two-wiper Digitally-Controlled (XDCP) Potentiometer |
| 中文描述： | DUAL 100K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 256 POSITIONS, PDSO24 |
| 封裝： | 4.40 MM, TSSOP-24 |
| 文件頁數： | 13/18頁 |
| 文件大?。?/td> | 372K |
| 代理商： | X9455TV24I-2.7 |
13
FN8202.0
November 10, 2004
All other address bits in the address byte must be set to “0”
during 2-wire write operations and their value should be
ignored when read.
Byte Write Operation
For any Byte Write operation, the X9455 requires the Slave
Address byte, an Address Byte, and a Data Byte (See Figure
7). After each of them, the X9455 responds with an ACK.
The master then terminates the transfer by generating a
STOP condition. At this time, if the write operation is to a
volatile register (WCR, or SR), the X9455 is ready for the
next read or write operation. If the write operation is to a
nonvolatile register (DR), and the WP pin is high, the X9455
begins the internal write cycle to the nonvolatile memory.
During the internal nonvolatile write cycle, the X9455 does
not respond to any requests from the master. The SDA
output is at high impedance.
The SR bits and WP pin determine the register being
accessed through the 2-wire interface. See Table 2 on page
9.
As noted before, any write operation to a Data Register
(DR), also transfers the contents of all the data registers in
that row to their corresponding WCR.
For example, to write 3Ahex to the Level 1 Data Register of
wiper 1A (DR1A1) the following sequence is required:
During the sequence of this example, WP pin must be high,
and A0, A1, and A2 pins must be low. When completed, the
DR1A1 register and the WCR1A of Wiper 1A will be set to
3Ah, and the other data registers in Row 1 will transfer their
contents to the respective WCRs.
S
t
a
r
t
S
t
o
p
Slave
Address
Status Register
Address
Data
A
C
K
A
C
K
Signal at SDA
Signals from
the Slave
Signals from
the Master
0
A
C
K
If bit 0 of data byte = 1,
DR contents move to WCR
during this ACK period
0 1 0 1
0 0 0 0 0 1 1 1
0 0 0 0 0 x x 1
DR select
FIGURE 6. STATUS REGISTER WRITE (USES STANDARD BYTE WRITE SEQUENCE TO SET UP ACCESS TO A DATA REGISTER)
TABLE 4. ADDRESSING FOR 2-WIRE INTERFACE ADDRESS
BYTE
ADDRESS (HEX)
CONTENTS
0
Wiper 0A
1
Wiper 1B
2
Wiper 1A
3
Wiper 0B
4
Not Used
5
Not Used
6
Not Used
7
Status Register
START
Slave Address
ACK
Address Byte
ACK
Data Byte
ACK
(note: at this ACK, the WCRs are all updated with their
respective DR.)
STOP
0101 0000
0000 0111
0000 0011
START
Slave Address
ACK
Address Byte
ACK
Data Byte
ACK
STOP
0101 0000
0000 0010
0011 1010
(Hardware Address = 000,
and a Write command)
(Indicates Status Register
address)
(Data Register Level 1 and
NVEnable selected)
(Hardware address = 000,
Write command)
(Access Wiper 1A)
(Write Data Byte 3Ah)
X9455
相關PDF資料 |
PDF描述 |
|---|---|
| X9455YV24-2.7 | Hook-Up Wire; Conductor Size AWG:24; No. Strands x Strand Size:19 x 36; Jacket Color:Yellow; Approval Bodies:UL; Approval Categories:UL AWM Style 1180; Passes VW-1 Flame Test; Cable/Wire MIL SPEC:MIL-W-16878/5 Type EE RoHS Compliant: Yes |
| X9455UV24-2.7 | Dual Two-wiper Digitally-Controlled (XDCP) Potentiometer |
| X9455UV24I-2.7 | Dual Two-wiper Digitally-Controlled (XDCP) Potentiometer |
| X9455WV24-2.7 | Dual Two-wiper Digitally-Controlled (XDCP) Potentiometer |
| X9455WV24I-2.7 | Dual Two-wiper Digitally-Controlled (XDCP) Potentiometer |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X9455TV24IZ-2.7 | 功能描述:IC XDCP DUAL 256TAP 100K 24TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 接片:32 電阻（歐姆）:50k 電路數:1 溫度系數:標準值 50 ppm/°C 存儲器類型:易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 細型，TSOT-23-6 供應商設備封裝:TSOT-23-6 包裝:帶卷 (TR) |
| X9455US24I-2.7 | 功能描述:IC XDCP DUAL 256TAP 50K 24-SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 接片:32 電阻（歐姆）:50k 電路數:1 溫度系數:標準值 50 ppm/°C 存儲器類型:易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 細型，TSOT-23-6 供應商設備封裝:TSOT-23-6 包裝:帶卷 (TR) |
| X9455UV24-2.7 | 功能描述:IC DCP DUAL 50K 256TAP 24-TSSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
| X9455UV24I-2.7 | 功能描述:IC DCP DUAL 50K 256TAP 24-TSSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:3,300 系列:WiperLock™ 接片:257 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 150 ppm/°C 存儲器類型:易失 接口:3 線 SPI（芯片選擇） 電源電壓:1.8 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-VDFN 裸露焊盤 供應商設備封裝:8-DFN-EP（3x3） 包裝:帶卷 (TR) |
| X9455UV24IZ-2.7 | 功能描述:IC POT DUAL 2WIPER 50K 24-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:XDCP™ 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
發布緊急采購，3分鐘左右您將得到回復。