CoolRunner XPLA3 CPLD
12
DS012 (v2.5) May 26, 2009
Product Specification
R
Revision History
The following table shows the revision history for this document.
Notice of Disclaimer
THE XILINX HARDWARE FPGA AND CPLD DEVICES REFERRED TO HEREIN (“PRODUCTS”) ARE SUBJECT TO THE TERMS AND
WARRANTY DOES NOT EXTEND TO ANY USE OF PRODUCTS IN AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE
SPECIFICATIONS STATED IN THE XILINX DATA SHEET. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRODUCTS ARE NOT DESIGNED OR INTENDED TO BE FAIL-SAFE OR FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE
PERFORMANCE, SUCH AS LIFE-SUPPORT OR SAFETY DEVICES OR SYSTEMS, OR ANY OTHER APPLICATION THAT INVOKES
THE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). USE OF PRODUCTS IN CRITICAL APPLICATIONS IS AT THE SOLE RISK OF CUSTOMER, SUBJECT TO
APPLICABLE LAWS AND REGULATIONS.
Date
Version
Revision
02/20/00
1.0
Initial Xilinx release.
03/06/00
1.1
Minor updates.
11/30/00
1.2
Updated Macrocell numbering, I/O pins, and available packages.
02/09/01
1.3
Updated specification.
04/11/01
1.4
Under Features, changed Global 3-state to Universal 3-state. Added XCR3512XL device;
changed TSU numbers, added 324-pin Fineline BGA package, Programming Specs:
changed TINIT from 50 min. to 50 max., Quality & Rel. specs: added NPE for UMC
devices—10,000 cycles.
01/07/02
1.5
Table 7: Added Note 1, changed TINIT from 50 to 200 (max). Changed ICCP from 20 to 30 (max); updated Device Family
Table 1 usable gate counts. Updated Device Family
Table 2package types, updated I/O cell section. Absolute Maximum Ratings table: Changed max
supply voltage relative to GND to 4.0V to match XC9500XL and UMC standard specs.
01/06/03
1.6
Added TPTCK parameter to timing model. Changed FSYSTEM for all devices in Table 1. Changed from Advance Information to Preliminary. Added Note 1 to
Figure 2 regarding
XCR3384XL TQ144 JTAG pins.
06/23/03
1.7
02/13/04
1.8
Added Maximum Soldering temperature (TSOL) specification. Added links.
09/29/04
1.9
Added text on shadow memory to first paragraph, page 2.
01/10/05
2.0
Changed Function Block input references to 40.
04/08/05
2.1
Add ICCSB Typical Specification
03/31/06
2.2
Added Warranty Disclaimer.
08/31/07
2.3
Added description of subthreshold power-up characteristics, page 6. Changes to Figure 7
and Table 3 on page 6 to describe subthreshold behavior. Add security description, page 6.
09/08/08
2.4
Removed PC44 and PCG44 packages. See Product Discontinuation Notice xcn07022.pdf.
05/26/09
2.5