參數資料
型號: μPD30210
廠商: NEC Corp.
英文描述: 64-Bit MIPS RISC Microprocessor(64位MIPS RISC 微處理器)
中文描述: 64位MIPS RISC微處理器(64位的MIPS的RISC微處理器)
文件頁數: 22/24頁
文件大?。?/td> 170K
代理商: ΜPD30210
μ
PD30200, 30210
22
Data Sheet U10116EJ6V0DS00
NOTES FOR CMOS DEVICES
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note:
Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity
as much as possible, and quickly dissipate it once, when it has occurred. Environmental control
must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using
insulators that easily build static electricity. Semiconductor devices must be stored and transported
in an anti-static container, static shielding bag or conductive material. All test and measurement
tools including work bench and floor should be grounded. The operator should be grounded using
wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need
to be taken for PW boards with semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note:
No connection for CMOS device inputs can be cause of malfunction. If no connection is provided
to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence
causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels
of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to V
DD
or GND with a resistor, if it is considered to have a possibility of
being an output pin. All handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note:
Power-on does not necessarily define initial status of MOS device. Production process of MOS
does not define the initial operation status of the device. Immediately after the power source is
turned ON, the devices with reset function have not yet been initialized. Hence, power-on does
not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after power-on for devices
having reset function.
The related documents indicated in this publication may include preliminary versions. However,
preliminary versions are not marked as such.
V
R
4000, V
R
4100, V
R
4300, V
R
4305, V
R
4310, and V
R
Series are trademarks of NEC Corporation.
MIPS is a trademark of MIPS Technologies Inc.
相關PDF資料
PDF描述
μPD30200 High-Performance, 64-Bit RISC Microprosessor(高性能64位RISC微處理器)
μPD30700L 64-Bit Microprocessor(64位RISC微處理器)
μPD30700 64-Bit Microprocessor(64位RISC微處理器)
μPD30710 64-Bit Microprocessor(64位RISC微處理器)
μPD431000A-X 1 M-Bit CMOS Static RAM(1M CMOS靜態RAM)
相關代理商/技術參數
參數描述
PD3032 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Li-ion Rechargeable Battery
PD306 制造商:未知廠家 制造商全稱:未知廠家 功能描述:PHOTOTRANSISTOR | DARLINGTON | 800NM PEAK WAVELENGTH | 30M | DOME-3.0
PD307 制造商:未知廠家 制造商全稱:未知廠家 功能描述:PHOTOTRANSISTOR | DARLINGTON | 800NM PEAK WAVELENGTH | 30M | LED-2A
PD308 制造商:NIEC 制造商全稱:Nihon Inter Electronics Corporation 功能描述:DIODE MODULE 30A/800V
PD30-CADG13 制造商:P-TEC 制造商全稱:P-tec Corporation 功能描述:Single Digit 7 Segment 4.0” LED Display