534
APPENDIX A DEVELOPMENT TOOLS
A.3.1 Hardware (2/2)
(2) When using the in-circuit emulator IE-784000-R
IE-784000-R
In-circuit Emulator
IE-70000-98-IF-B or
IE-7000-98-IF-C
Note
Interface Adapter
IE-70000-98N-IF
IE-70000-PC-IF-B or
IE-7000-PC-IF-C
Note
Interface Adapter
IE-78000-R-SV3
Interface Adapter
IE-784000-R-EM
IE-784046-NS-EM1
Note
IE-784046-R-EM1
Emulation Board
IE78K4-R-EX2
Note
Emulation Probe
Conversion Board
EP-78230GC-R
Emulation Probe
EV-9200GC-80
Conversion Socket
(Refer to
Figures
A-2 and A-3
)
Note
Under development
Remark
EV-9200GC-80 is sold in five units.
The IE-784000-R is an in-circuit emulator that can be used with the entire 78K/IV
series. It is used in combination with the optionally available IE-784000-R-EM, IE-
784046-NS-EM1, or IE-784046-R-EM1. Debugging is performed with a host
machine connected. The optionally available integrated debugger (ID78K4) and
device file are required, and in combination with these it is possible to perform
debugging at the C language or structured assembly language source program
level. More efficient debugging or program testing is possible by means of the C0
coverage function, etc. Connection to the host machine is performed by means of
Ethernet
TM
or a dedicated bus, and a optionally available interface adapter is
required.
This adapter is required when using the PC-9800 Series computer (except notebook
type) as the IE-784000-R host machine.
Interface adapter and cable necessary for using when a PC-9800 series notebook
computer is used as the host machine of IE-784000-R.
This adapter is required when using the IBM PC/AT and its compatible computers
as the IE-784000-R host machine.
This is adapter and cable required when using an EWS computer as the IE-78400-R
host machine, and is used connected to the board in the IE-784000-R.
10 Base-5 is supported as Ethernet. For the other methods, a commercially
available conversion adapter is necessary.
Emulation board for use with the entire 78K/IV series.
This board emulates the operations of the peripheral hardware peculiar to a device.
This conversion board for 80-pin QFP is required when using the IE-784046-NS-
EM1 on the IE-784000-R. This is not necessary when using the conventional model
IE-784046-R-EM1.
This probe is used to connect the in-circuit emulator to the target system and is
designed for 80-pin plastic QFP (GC-3B9 type).
This conversion socket connects the EP-78340GC-R to the target system board
designed to mount a 80-pin plastic QFP (GC-3B9 type).