![](http://datasheet.mmic.net.cn/Rabbit-Semiconductor/20-101-1139_datasheet_95657/20-101-1139_17.png)
RabbitCore RCM4300 User’s Manual
17
Locate the Serial Options dialog on the “Communications” tab in the Dynamic C
Options > Project Options
menu. Choose a lower debug baud rate. Click OK to save.
Press <Ctrl-Y> to force Dynamic C to recompile the BIOS. You should receive a Bios
compiled successfully
message once this step is completed successfully.
2.4 Where Do I Go From Here?
If the sample program ran fine, you are now ready to go on to the sample programs in
Chapter 3 and to develop your own applications. The sample programs
can be easily modi-
fied for your own use. The user's manual also provides complete hardware reference infor-
mation and software function calls for the RCM4300 series of modules and the Prototyping
Board.
For advanced development topics, refer to the Dynamic C User’s Manual, also in the
online documentation set.
2.4.1 Technical Support
NOTE: If you purchased your RCM4300 through a distributor or through a Rabbit
Semiconductor partner, contact the distributor or partner first for technical support.
If there are any problems at this point:
Use the Dynamic C Help menu to get further assistance with Dynamic C.
Check the Rabbit Semiconductor Technical Bulletin Board and forums at