- 您現在的位置：買賣IC網 > PDF目錄371398 > 24LC16B (Microchip Technology Inc.) 16K 2.5V CMOS Serial EEPROMs(16K位、16字節頁緩沖器、10M次擦寫周期、有硬件寫保護、2.5-5.5V工作、CMOS IIC串行EEPROM) PDF資料下載
參數資料
| 型號： | 24LC16B |
| 廠商： | Microchip Technology Inc. |
| 英文描述： | 16K 2.5V CMOS Serial EEPROMs(16K位、16字節頁緩沖器、10M次擦寫周期、有硬件寫保護、2.5-5.5V工作、CMOS IIC串行EEPROM) |
| 中文描述： | 16K的為2.5V的CMOS串行EEPROM（16K的位，16字節頁緩沖器，1000萬次擦寫周期，有硬件寫保護,2.5 - 5 .5 V工作，國際進口證的CMOS串行EEPROM的） |
| 文件頁數： | 6/10頁 |
| 文件大?。?/td> | 111K |
| 代理商： | 24LC16B |
24LC16B
DS20070F-page 6
1995 Microchip Technology Inc.
6.0
ACKNOWLEDGE POLLING
Since the device will not acknowledge during a write
cycle, this can be used to determine when the cycle is
complete (this feature can be used to maximize bus
throughput). Once the stop condition for a write com-
mand has been issued from the master, the device ini-
tiates the internally timed write cycle. ACK polling can
be initiated immediately. This involves the master
sending a start condition followed by the control byte
for a write command (R/W = 0). If the device is still
busy with the write cycle, then no ACK will be returned.
If the cycle is complete, then the device will return the
ACK and the master can then proceed with the next
read or write command. See Figure 6-1 for flow dia-
gram.
FIGURE 6-1:
ACKNOWLEDGE POLLING
FLOW
Send
Write Command
Send Stop
Condition to
Initiate Write Cycle
Send Start
Send Control Byte
with R/W = 0
Did Device
Acknowledge
(ACK = 0)
Next
Operation
No
Yes
7.0
WRITE PROTECTION
The 24LC16B can be used as a serial ROM when the
WP pin is connected to V
CC
. Programming will be
inhibited and the entire memory will be write-protected.
8.0
READ OPERATION
Read operations are initiated in the same way as write
operations with the exception that the R/W bit of the
slave address is set to one. There are three basic
types of read operations: current address read, ran-
dom read, and sequential read.
8.1
Current Address Read
The 24LC16B contains an address counter that main-
tains the address of the last word accessed, internally
incremented by one. Therefore, if the previous access
(either a read or write operation) was to address n, the
next current address read operation would access data
from address n + 1. Upon receipt of the slave address
with R/W bit set to one, the 24LC16B issues an
acknowledge and transmits the eight bit data word.
The master will not acknowledge the transfer but does
generate a stop condition and the 24LC16B discontin-
ues transmission (see Figure 8-2).
8.2
Random Read
Random read operations allow the master to access
any memory location in a random manner. To perform
this type of read operation, first the word address must
be set. This is done by sending the word address to the
24LC16B as part of a write operation. After the word
address is sent, the master generates a start condition
following the acknowledge. This terminates the write
operation, but not before the internal address pointer is
set. Then the master issues the control byte again but
with the R/W bit set to a one. The 24LC16B will then
issue an acknowledge and transmits the eight bit data
word. The master will not acknowledge the transfer but
does generate a stop condition and the 24LC16B dis-
continues transmission (see Figure 8-3).
FIGURE 8-1:
PAGE WRITE
S
T
O
P
SDA LINE
P
DATA n
S
T
A
R
T
CONTROL
BYTE
S
WORD
ADDRESS (n)
BUS ACTIVITY:
MASTER
BUS ACTIVITY:
A
C
K
A
C
K
A
C
K
DATA n + 1
A
C
K
DATA n + 15
A
C
K
相關PDF資料 |
PDF描述 |
|---|---|
| 24LC174 | 16K 2.5V Cascadable CMOS serial EEPROMs with OTP Security Page(16K位,2.5V層疊式IIC串行EEPROM) |
| 24LC21-IP | 1K 2.5V Dual Mode I 2 C Serial EEPROM |
| 24LC21-ISN | 1K 2.5V Dual Mode I 2 C Serial EEPROM |
| 24LC21 | 1K 2.5V Dual Mode I 2 C Serial EEPROM |
| 24LC21-P | Connector; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):Yes |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 24LC16B/MT | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:I2C Serial EEPROM |
| 24LC16B/P | 功能描述:電可擦除可編程只讀存儲器 2kx8 - 1.8V RoHS:否 制造商:Atmel 存儲容量:2 Kbit 組織:256 B x 8 數據保留:100 yr 最大時鐘頻率:1000 KHz 最大工作電流:6 uA 工作電源電壓:1.7 V to 5.5 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8 |
| 24LC16B-/P | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:I2C Serial EEPROM |
| 24LC16B/P | 制造商:Microchip Technology Inc 功能描述:IC EEPROM SERIAL 16K 24LC16 DIP8 |
| 24LC16B/S15K | 制造商:Microchip Technology Inc 功能描述:16K, 2K X 8 2.5V SERIAL EE DI - Gel-pak, waffle pack, wafer, diced wafer on film |
發布緊急采購，3分鐘左右您將得到回復。