參數資料
型號： 514KAAXXXXXXBAG
廠商： SILICON LABORATORIES
元件分類： 時鐘產生/分配
英文描述： 250 MHz, OTHER CLOCK GENERATOR, PDSO6
封裝： 3.20 X 5 MM, ROHS COMPLIANT PACKAGE-6
文件頁數： 15/32頁
文件大小： 267K
代理商： 514KAAXXXXXXBAG
Si514
22
Preliminary Rev. 0.9
4.3. I2C Interface
Configuration and operation of the Si514 is controlled by reading and writing to the RAM space using the I2C
interface. The device operates in slave mode with 7-bit addressing and can operate in Standard-Mode (100 kbps)
or Fast-Mode (400 kbps). Burst data transfer with auto address increments are also supported.
The I2C bus consists of a bidirectional serial data line (SDA) and a serial clock input (SCL). Both the SDA and SCL
pins must be connected to the VDD supply via an external pull-up as recommended by the I2C specification. The
Si514 7-bit I2C slave address is user-customized during the part number configuration process. See "5. Pin
Descriptions" on page 24 for more details.
Data is transferred MSB first in 8-bit words as specified by the I2C specification. A write command consists of a 7-
bit device (slave) address + a write bit, an 8-bit register address, and 8 bits of data as shown in Figure 5.
A write burst operation is also shown where every additional data word is written using an auto-incremented
address.
Figure 5. I2C Write Operation
A read operation is performed in two stages. A data write is used to set the register address, then a data read is
performed to retrieve the data from the set address. A read burst operation is also supported. This is shown in
1 – Read
0 – Write
A – Acknowledge (SDA LOW)
N – Not Acknowledge (SDA HIGH)
S – START condition
P – STOP condition
From slave to master
From master to slave
Write Operation – Single Byte
S
0 A Reg Addr [7:0]
Slv Addr [6:0]
A
Data [7:0]
P
A
Write Operation - Burst (Auto Address Increment)
Reg Addr +1
S
0 A Reg Addr [7:0]
Slv Addr [6:0]
A
Data [7:0]
A
Data [7:0]
P
A
相關PDF資料
PDF描述
514KABXXXXXXBAG 170 MHz, OTHER CLOCK GENERATOR, PDSO6
514KBAXXXXXXBAGR 250 MHz, OTHER CLOCK GENERATOR, PDSO6
514KBBXXXXXXAAGR 170 MHz, OTHER CLOCK GENERATOR, PDSO6
514KBCXXXXXXAAG 125 MHz, OTHER CLOCK GENERATOR, PDSO6
514KCBXXXXXXAAGR 170 MHz, OTHER CLOCK GENERATOR, PDSO6
相關代理商/技術參數
參數描述
514KCB000817BAG 功能描述:標準時鐘振蕩器 PROGRMABLE XO 6 PIN 0.7PS RS JTR RoHS:否 制造商:AVX 產品:Standard Clock Oscillators 封裝 / 箱體:7 mm x 5 mm 頻率:75 MHz 頻率穩定性:50 PPM 電源電壓:2.5 V 負載電容: 端接類型:SMD/SMT 最小工作溫度:0 C 最大工作溫度:+ 70 C 輸出格式:LVDS 尺寸: 封裝:Reel 系列:
514KCB000942BAG 功能描述:標準時鐘振蕩器 PROGRMABLE XO 6 PIN 0.7PS RS JTR RoHS:否 制造商:AVX 產品:Standard Clock Oscillators 封裝 / 箱體:7 mm x 5 mm 頻率:75 MHz 頻率穩定性:50 PPM 電源電壓:2.5 V 負載電容: 端接類型:SMD/SMT 最小工作溫度:0 C 最大工作溫度:+ 70 C 輸出格式:LVDS 尺寸: 封裝:Reel 系列:
514L3 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Infrared Emitting Diodes (IRED)
514MAA000148AAG 制造商:Silicon Laboratories Inc 功能描述:OSCILLATOR - Trays
514MAA000881AAG 制造商:Silicon Laboratories Inc 功能描述:OSCILLATOR - Trays
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*