參數資料
型號: 73S1209F-44IM/F
廠商: TERIDIAN SEMICONDUCTOR CORP
元件分類: 電源管理
英文描述: POWER SUPPLY MANAGEMENT CKT, QCC44
封裝: LEAD FREE, QFN-44
文件頁數: 3/123頁
文件大?。?/td> 1385K
代理商: 73S1209F-44IM/F
73S1209F Data Sheet
DS_1209F_004
ATR Timeout Registers (ATRLsB): 0xFE20
0x00, (ATRMsB): 0xFE1F
0x00
Table 104: The ATRLsB Register
MSB
LSB
ATRTO.7
ATRTO.6
ATRTO.5
ATRTO.4
ATRTO.3
ATRTO.1 ATRTO.2 ATRTO.0
Table 105: The ATRMsB Register
MSB
LSB
ATRTO.15 ATRTO.14 ATRTO.13 ATRTO.12 ATRTO.11 ATRTO.10 ATRTO.9 ATRTO.8
These registers (ATRLsB and ATRLsB) form the ATR timeout (ATRTO [15:0]) parameter. Time in ETU
between the leading edge of the first character and leading edge of the last character of the ATR
response. Timer is enabled when the RCVATR is set and starts when leading edge of the first start bit is
received and disabled when the RCVATR is cleared. An ATR timeout is generated if this time is
exceeded.
TS Timeout Register (STSTO): 0xFE21
0x00
Table 106: The STSTO Register
MSB
LSB
TST0.7
TST0.6
TST0.5
TST0.4
TST0.3
TST0.1
TST0.2
TST0.0
The TS timeout is the time in ETU between the de-assertion of smart card reset and the leading edge of
the TS character in the ATR (when DETTS is set). The timer is started when smart card reset is
de-asserted. An ATR timeout is generated if this time is exceeded (MUTE card).
Reset Time Register (RLength): 0xFE22
0x70
MSB
LSB
RLen.7
RLen.6
RLen.5
RLen.4
RLen.3
RLen.1
RLen.2
RLen.0
Table 107: The RLength Register
Time in ETUs that the hardware delays the de-assertion of RST. If set to zero and RSTCRD = 0, the
hardware adds no extra delay and the hardware will release RST after VCCOK is asserted during
power-up. If set to one, it will delay the release of RST by the time in this register. When the firmware
sets the RSTCRD bit, the hardware will assert reset (RST = 0 on pin). When firmware clears the bit, the
hardware will release RST after the delay specified in Rlen. If firmware sets the RSTCRD bit prior to
instructing the power to be applied to the smart card, the hardware will not release RST after power-up
until RLen after the firmware clears the RSTCRD bit. This provides a means to power up the smart card
and hold it in reset until the firmware wants to release the RST to the selected smart card. Works with
the selected smart card interface.
100
Rev. 1.2
相關PDF資料
PDF描述
73S1210F-44IMR/F 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, QCC44
73S1210F-68IM/F/P 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, QCC68
73S1210F-44IMR/F/P 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, QCC44
73S1210F-68IMR/F/P 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, QCC68
73S1210F-68IM/F 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, QCC68
相關代理商/技術參數
參數描述
73S1209F-44IMR/F 功能描述:8位微控制器 -MCU Contained 80515-SoC Serial Hst Interface RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
73S1209F-44IMR/F/P 功能描述:IC SMART CARD READER PROG 44-QFN RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:73S12xx 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:260 系列:73S12xx 核心處理器:80515 芯體尺寸:8-位 速度:24MHz 連通性:I²C,智能卡,UART/USART,USB 外圍設備:LED,POR,WDT 輸入/輸出數:9 程序存儲器容量:64KB(64K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:2K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-VFQFN 裸露焊盤 包裝:管件
73S1209F-44M/F/PD 功能描述:8位微控制器 -MCU RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
73S1209F-44MR/F/PD 功能描述:8位微控制器 -MCU RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
73S1209F-68IM/F 功能描述:8位微控制器 -MCU Contained 80515-Soc Serial Hst Interface RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT