- 您現在的位置：買賣IC網 > PDF目錄7077 > 8344 (3M)WORKSURFACE RIGID ESD DISSP GRAY PDF資料下載
參數資料
| 型號： | 8344 |
| 廠商： | 3M |
| 文件頁數： | 10/16頁 |
| 文件大?。?/td> | 0K |
| 描述： | WORKSURFACE RIGID ESD DISSP GRAY |
| 標準包裝： | 1 |
| 系列： | 8300 |
| 墊子類型： | 桌子，工作臺 |
| 形狀： | 矩形 |
| 長度： | 3'（0.91m） |
| 寬： | 2'（0.61m） |
| 厚度： | 0.13"（3.30mm） |
| 顏色： | 灰 |
| 材質： | Laminate |
| 特點： | 耗散 |
| 包括： | 接地軟線，接地卡扣 |
| 其它名稱： | 05400718619 98079815852 |
3
78-8136-3801-8
3M Static Dissipative Rigid Worksurface 8300 Series
Installation Instructions
1.0
Industry definitions
A.
Backer: a phenolic sheet placed on the opposite (back) side of the substrate to which the laminate is
adhered. The backer is used to offset stresses on the substrate caused by the laminate. It also acts as a
moisture barrier (See Section 10.0).
B.
No drip edge: a raised rim on a counter/benchtop/work surface to prevent runoff.
C.
Glue line: the adhesive layer used to adhere laminate to the surface of a substrate.
D.
Jroller 3 inch: a handheld roller used to apply even pressure when bonding laminate to a surface. A
pressure of 50 pounds per lineal inch is recommended for most contact adhesives.
E.
NEMA: National Electrical Manufacturers’ Association
F.
NEMA LD 32000: HighPressure Decorative Laminate
NEMA LD 32000 Annex A: Performance, Applications, Fabrication, & Installation of HighPressure
Decorative Laminate
G.
Off Fall: excess laminate due to dimensional inconsistencies or irregularities in the substrate to which
the laminate is applied.
H.
Postforming: bending laminate sheet over or around the edge profile of a counter; this requires special
procedures (See Section 8.0)
I.
Tempilaq/Templistik: colored marking chalk or wax that is heatsensitive, i.e., changes color or melts
when a certain temperature is reached; used to indicate that the surface of a laminate has reached the
proper temperature for thermoforming (325°F). (See Section 8.0)
J.
Waterfall edge: a 90° postformed edge on a counter.
2.0
3M Static Dissipative Rigid Worksurface 8300 Series Specifications
A.
Resistance values: Resistance measurements are used to establish the chargedraining capability of the
static dissipative rigid worksurface. The ESD Association evaluates two resistance values in classifying
dissipative laminate and other static control surfacing materials. The tests are as follows:
1) Surface to Ground point resistance Use a 3M Test Kit 701 for static control surfaces. Test the
resistance between the top surface of the table top and the ground point per ESD Association
Standard 4.1 [tested at 72°F (22°C), 50% RH]. The values should be between 1 x 106 1 x 109 ohms
(l 1,000 Megohms).
2) Point to Point resistance Use a 3M Test Kit 701 for static control surfaces. Test the resistance
between two points on the top surface of the table top per ESD Association Standard 4.1 [Tested at
72°F (22°C), 50% RH]. Typical value is 6 x 107 ohms (60 Megohms).
AdditionalTest:
Ground Point to Ground Point resistance – Perform this test when the worksurface ground connection
is to be electrically monitored. Equipment such as the 3M Workstation Monitor 724 continuously
monitors the ground connection through the interior conductive layer of the laminate. Use a 3M Test
Kit 701 for static control surfaces to pretest and ensure that the grounding hardware is making sufficient
contact to the conductive layer. Connect one of the test leads to each of the two ground hardware items
installed on the tabletop. Set the test selector switch to the 10V position. Push the test button and the
reading should be less than 1 x 106 ohms (1 Megohm).
B.
Thickness: 0.040 in. nominal
C.
Density: 1.45 grams/cc
相關PDF資料 |
PDF描述 |
|---|---|
| 8343 | WORKSURFACE RIGID ESD DISSP BGE |
| 2-1419104-2 | RELAY GEN PURPOSE SPST 30A 48V |
| 431301-23-0 | TERM BARRIER 23CIRC 1 ROW .4375 |
| V23061B1005A301 | RELAY GEN PURPOSE SPDT 8A 12V |
| GP1500R-0.010-02-0816 | THERMAL PAD .010" 8"X16" GP1500R |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 83440 00000020 05 | 功能描述:工業壓力 / 力傳感器 PRESSURE SWITCH RoHS:否 制造商:Honeywell 工作壓力:0 bar to 25 bar 壓力類型:Sealed Gauge 準確性:0.25 % 輸出類型: 安裝風格:Screw 工作電源電壓:8 V to 30 V 輸出電壓:8 V to 30 V 封裝: |
| 83440-00000020-05 | 功能描述:板上安裝壓力/力傳感器 PRESSURE SWITCH RoHS:否 制造商:Honeywell 工作壓力:0 bar to 4 bar 壓力類型:Gage 準確性:+ / - 0.25 % 輸出類型:Digital 安裝風格:Through Hole 工作電源電壓:5 V 封裝 / 箱體:SIP 端口類型:Dual Radial Barbed, Same sides |
| 834402 | 制造商:Whirlpool 功能描述:KNOB, SURFACE *NLA 08/06* |
| 8-34404-2 | 制造商:TE Connectivity 功能描述:TERMINAL,BUDG R 12-10 8 - Bulk |
| 834-40CM-9.5 | 制造商:NORTH SAFETY PRODUCTS 功能描述:GLOVE GAUNTLET CHEM RES 40CM (1PR) |
發布緊急采購，3分鐘左右您將得到回復。