參數資料
型號： 935260531512
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQCC44
封裝： PLASTIC, LCC-44
文件頁數： 15/67頁
文件大?。?/td> 400K
代理商： 935260531512
1998 Apr 07
22
Philips Semiconductors
Product specication
8-bit Flash microcontrollers
P89C738; P89C739
10.2.2
CAPTURE MODE
In the capture mode (see Fig.11) there are two options
which are selected by bit EXEN2 in T2CON. If EXEN2 = 0,
then Timer 2 is a 16-bit timer/counter which on overflow
sets bit TF2 (Timer 2 overflow bit). TF2 can be used to
generate an interrupt. If EXEN2 = 1, Timer 2 operates as
above, with the added feature that a HIGH-to-LOW
transition at the external input T2EX causes the current
value in Timer 2 registers (TL2 and TH2) to be captured
into registers RCAP2L and RCAP2H, respectively. The
HIGH-to-LOW transition of T2EX also causes bit EXF2 in
T2CON to be set. EXF2 can be used to generate an
interrupt.
10.2.3
AUTOMATIC RELOAD MODE
In the automatic reload mode (see Fig.12) there are two
options which are selected by bit EXEN2 in SFR T2CON.
If EXEN2 = 0, then a Timer 2 overflow sets TF2 and
causes the Timer 2 registers to be reloaded with the 16-bit
value in registers RCAP2L and RCAP2H, which are preset
by software.
If EXEN2 = 1, Timer 2 operates as above, with the added
feature that a HIGH-to-LOW transition at the external input
T2EX triggers the 16-bit reload and sets EXF2.
10.2.4
BAUD RATE GENERATOR MODE
The baud rate generator mode (see Fig.13) is selected by
RCLK = 1 and/or TCLK = 1 in SFR T2CON. Overflows of
either Timer 2 or Timer 1 can be used independently for
generating baud rates for transmit and receive.
The baud rate generation by Timer 1 and/or Timer 2 is
used for the Serial Port in Mode 1 and Mode 3. The baud
rate generation mode is similar to the automatic reload
mode, in that a roll-over in TH2 causes the Timer 2
registers to be reloaded with the 16-bit value in registers
RCAP2L and RCAP2H, which are preset by software.
The baud rates for the Serial Port in Modes 1 and 3 are
determined by Timer 2 overflow rate as follows:
Timer 2 can be configured for either ‘timer’ or ‘counter’
operation. Normally, as a timer it would increment every
machine cycle (thus at 1
12fclk). As a baud rate generator,
however it increments every state time (thus at 1
2fclk).
The baud rate is given by the formula:
In this mode an overflow of Timer 2 does not set TF2.
If EXEN2 = 1, a HIGH-to-LOW transition at pin T2EX sets
EXF2 and can be used to generate an interrupt.
Baud rate
Timer 2 overflow rate
16
--------------------------------------------------------
=
Baud rate
f
clk
32
65536
RCAP2H, RCAP2L
()
–
[]
×
----------------------------------------------------------------------------------------------------
=
Fig.11 Timer 2 in capture mode.
handbook, full pagewidth
MLA608
TL2
(8 BITS)
TR2
control
TH2
(8 BITS)
RCAP2L
RCAP2H
EXF2
TF2
Timer 2
interrupt
EXEN2
control
C/T2 = 1
T2 PIN
12
OSC
transition
detector
T2EX PIN
C/T2 = 0
capture
相關PDF資料
PDF描述
935225410112 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PDIP40
06F9814 DIODE SCHOTTKY 0.5A
06F9823 DIODE SCHOTTKY GLEICHRICHTER
06F9946 DIODE SCHOTTKY GLEICHRICHTER
935228870112 ABT SERIES, QUAD 4-BIT DRIVER, TRUE OUTPUT, PDSO48
相關代理商/技術參數
參數描述
935261069122 制造商:NXP Semiconductors 功能描述:IC SECURITY TRANSPONDER PLLMC
935262025112 制造商:NXP Semiconductors 功能描述:SUB ONLY IC
935262217118 制造商:NXP Semiconductors 功能描述:Real Time Clock Serial 8-Pin SO T/R
935264217557 制造商:NXP Semiconductors 功能描述:SUB ONLY IC
935267356112 制造商:NXP Semiconductors 功能描述:IC TEA1507PN
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*