參數資料
型號： 935270030157
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 1 CHANNEL(S), 3M bps, SERIAL COMM CONTROLLER, PQFP48
封裝： 7 X 7 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-313-2, LQFP-48
文件頁數： 20/53頁
文件大小： 704K
代理商： 935270030157
Philips Semiconductors
SC16C650A
Universal Asynchronous Receiver/Transmitter (UART)
with 32-byte FIFO and infrared (IrDA) encoder/decoder
Product data
Rev. 03 — 13 March 2003
27 of 49
9397 750 11207
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
7.8 Modem Status Register (MSR)
This register provides the current state of the control interface signals from the
modem, or other peripheral device to which the SC16C650A is connected. Four bits
of this register are used to indicate the changed information. These bits are set to a
logic 1 whenever a control input from the modem changes state. These bits are set to
a logic 0 whenever the CPU reads this register.
0
LSR[0]
Receive data ready.
Logic 0 = No data in receive holding register or FIFO (normal default
condition).
Logic 1 = Data has been received and is saved in the receive holding
register or FIFO.
Table 20:
Line Status Register bits description…continued
Bit
Symbol
Description
Table 21:
Modem Status Register bits description
Bit
Symbol
Description
7
MSR[7]
Data Carrier Detect. DCD (Active-HIGH, logical 1). Normally this bit is
the complement of the DCD input. In the loop-back mode this bit is
equivalent to the OUT2 bit in the MCR register.
6
MSR[6]
Ring Indicator. RI (Active-HIGH, logical 1). Normally this bit is the
complement of the RI input. In the loop-back mode this bit is equivalent
to the OUT1 bit in the MCR register.
5
MSR[5]
Data Set Ready. DSR (Active-HIGH, logical 1). Normally this bit is the
complement of the DSR input. In loop-back mode this bit is equivalent to
the DTR bit in the MCR register.
4
MSR[4]
Clear To Send. CTS. CTS functions as hardware ow control signal input
if it is enabled via EFR[7]. Flow control (when enabled) allows starting
and stopping the transmissions based on the external modem CTS
signal. A logic 1 at the CTS pin will stop SC16C650A transmissions as
soon as current character has nished transmission. Normally MSR[4] is
the complement of the CTS input. However, in the loop-back mode, this
bit is equivalent to the RTS bit in the MCR register.
3
MSR[3]
DCD [1]
Logic0=No DCD change (normal default condition).
Logic1=The DCD input to the SC16C650A has changed state since
the last time it was read. A modem Status Interrupt will be generated.
2
MSR[2]
RI [1]
Logic0=No RI change (normal default condition).
Logic1=The RI input to the SC16C650A has changed from a logic 0
to a logic 1. A modem Status Interrupt will be generated.
相關PDF資料
PDF描述
937-SP-3044-031 4 CONTACT(S), MALE, TELECOM AND DATACOM CONNECTOR, IDC, PLUG
937-SP-3088R-K1-031 8 CONTACT(S), MALE, TELECOM AND DATACOM CONNECTOR, IDC, PLUG
940-SP-3044-031 4 CONTACT(S), MALE, TELECOM AND DATACOM CONNECTOR, IDC, PLUG
940-SP-3088R-031 8 CONTACT(S), MALE, TELECOM AND DATACOM CONNECTOR, IDC, PLUG
940-SP-361010-K1-A108 10 CONTACT(S), MALE, TELECOM AND DATACOM CONNECTOR, IDC, PLUG
相關代理商/技術參數
參數描述
935270713557 制造商:NXP Semiconductors 功能描述:SUB ONLY IC CHP
935270792551 制造商:NXP Semiconductors 功能描述:IC BUFF DVR TRI-ST 16BIT 56VFBGA
935270792557 制造商:NXP Semiconductors 功能描述:IC BUFF DVR TRI-ST 16BIT 56VFBGA
935270793551 制造商:NXP Semiconductors 功能描述:IC BUS TRCVR 3-ST 16BIT 56VFBGA
935270793557 制造商:NXP Semiconductors 功能描述:IC BUS TRCVR 3-ST 16BIT 56VFBGA
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*