參數資料
型號: AD7734BRUZ
廠商: Analog Devices Inc
文件頁數: 8/32頁
文件大?。?/td> 0K
描述: IC ADC 24BIT 4-CH 28-TSSOP
標準包裝: 50
位數: 24
采樣率(每秒): 15.4k
數據接口: DSP,MICROWIRE?,QSPI?,串行,SPI?
轉換器數目: 1
功率耗散(最大): 100mW
電壓電源: 模擬和數字
工作溫度: -40°C ~ 105°C
安裝類型: 表面貼裝
封裝/外殼: 28-TSSOP(0.173",4.40mm 寬)
供應商設備封裝: 28-TSSOP
包裝: 管件
輸入數目和類型: 4 個單端,單極;4 個單端,雙極
產品目錄頁面: 779 (CN2011-ZH PDF)
配用: EVAL-AD7734EBZ-ND - BOARD EVALUATION FOR AD7734
AD7734
Data Sheet
Rev. A | Page 16 of 32
I/O PORT REGISTER
8 Bits, Read/Write Register, Address 01h, Default Value 30h + Digital Input Value × 40h
The bits in this register are used to configure and access the digital I/O port on the AD7734.
Bit
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Mnemonic
P0
P1
P0 DIR
P1 DIR
RDYFN
0
SYNC
Default
P0 Pin
P1 Pin
1
0
Bit
Mnemonic
Description
7, 6
P0, P1
When the P0 and P1 pins are configured as outputs, the P0 and P1 bits determine the pins’ output level. When
the P0 and P1 pins are configured as inputs, the P0 and P1 bits reflect the current input level on the pins.
5, 4
P0 DIR, P1 DIR
These bits determine whether the P0 and P1 pins are configured as inputs or outputs. When set to 1, the
corresponding pin will be an input; when reset to 0, the corresponding pin will be an output.
3
RDYFN
This bit is used to control the function of the RDY pin on the AD7734. When this bit is reset to 0, the RDY pin
goes low when any channel has unread data. When this bit is set to 1, the RDY pin will only go low if all
enabled channels have unread data.
2, 1
0
These bits must be 0 for proper operation.
0
SYNC
This bit enables the SYNC pin function. By default, this bit is 0 and SYNC/P1 can be used as a digital I/O pin.
When the SYNC bit is set to 1, the SYNC pin can be used to synchronize the AD7734 modulator and digital
filter with other devices in the system.
REVISION REGISTER
8 Bits, Read-Only Register, Address 02h, Default Value 02h + Chip Revision × 10h
Bit
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Mnemonic
Chip Revision Code
Chip Generic Code
Default
x
0
1
0
Bit
Mnemonic
Description
7–4
Chip Revision Code
4-Bit Factory Chip Revision Code
3–0
Chip Generic Code
On the AD7734, these bits will read back as 02h.
TEST REGISTER
24 Bits, Read/Write Register, Address 03h
This register is used for testing the part in the manufacturing process. The user must not change the default configuration of this register.
相關PDF資料
PDF描述
UMK105CH180JW-F CAP CER 18PF 50V 5% C0H 0402
AD7714ARSZ-3 IC ADC 24BIT SIGMA-DELTA 28SSOP
UMK105CH150KW-F CAP CER 15PF 50V 10% C0H 0402
AD7893ARZ-3 IC ADC 12BIT SRL T/H LP 8SOIC
UMK105CH150JW-F CAP CER 15PF 50V 5% C0H 0402
相關代理商/技術參數
參數描述
AD7734BRUZ 制造商:Analog Devices 功能描述:IC 24BIT ADC SMD 7734 TSSOP28
AD7734BRUZ-REEL 功能描述:IC ADC 24BIT 4CH SIG-DEL 28TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率(每秒):300k 數據接口:并聯 轉換器數目:1 功率耗散(最大):75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC(0.295",7.50mm 寬) 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端,單極;1 個單端,雙極
AD7734BRUZ-REEL7 功能描述:IC ADC 24BIT 4CH SIG-DEL 28TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率(每秒):300k 數據接口:并聯 轉換器數目:1 功率耗散(最大):75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC(0.295",7.50mm 寬) 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端,單極;1 個單端,雙極
AD7738 制造商:Analog Devices 功能描述:- Bulk
AD7738BRU 功能描述:IC ADC 24BIT 8-CH 28-TSSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率(每秒):300k 數據接口:并聯 轉換器數目:1 功率耗散(最大):75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC(0.295",7.50mm 寬) 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端,單極;1 個單端,雙極