參數資料
型號: AD8000YRDZ
廠商: Analog Devices Inc
文件頁數: 9/21頁
文件大小: 0K
描述: IC OPAMP CF LN 100MA 8SOIC
產品培訓模塊: Practical Guide High Speed PCB Layout
標準包裝: 98
放大器類型: 電流反饋
電路數: 1
轉換速率: 4100 V/µs
-3db帶寬: 1.58GHz
電流 - 輸入偏壓: 5µA
電壓 - 輸入偏移: 1000µV
電流 - 電源: 13.5mA
電流 - 輸出 / 通道: 100mA
電壓 - 電源,單路/雙路(±): 4.5 V ~ 12 V,±2.25 V ~ 6 V
工作溫度: -40°C ~ 125°C
安裝類型: 表面貼裝
封裝/外殼: 8-SOIC(0.154",3.90mm Width)裸露焊盤
供應商設備封裝: 8-SOIC-EP
包裝: 管件
產品目錄頁面: 769 (CN2011-ZH PDF)
AD8000
Data Sheet
Rev. B | Page 16 of 20
Placement of the capacitor returns (grounds), where the capaci-
tors enter into the ground plane, is also important. Returning
the capacitors grounds close to the amplifier load is critical for
distortion performance. Keeping the capacitors distance short,
but equal from the load, is optimal for performance.
In some cases, bypassing between the two supplies can help to
improve PSRR and to maintain distortion performance in
crowded or difficult layouts. This is as another option to
improve performance.
Minimizing the trace length and widening the trace from the
capacitors to the amplifier reduce the trace inductance. A series
inductance with the parallel capacitance can form a tank circuit,
which can introduce high frequency ringing at the output. This
additional inductance can also contribute to increased distor-
tion due to high frequency compression at the output. The use
of vias should be minimized in the direct path to the amplifier
power supply pins since vias can introduce parasitic inductance,
which can lead to instability. When required, use multiple large
diameter vias because this lowers the equivalent parasitic
inductance.
GROUNDING
The use of ground and power planes is encouraged as a method
of proving low impedance returns for power supply and signal
currents. Ground and power planes can also help to reduce
stray trace inductance and to provide a low thermal path for the
amplifier. Ground and power planes should not be used under
any of the pins of the AD8000. The mounting pads and the
ground or power planes can form a parasitic capacitance at the
amplifiers input. Stray capacitance on the inverting input and
the feedback resistor form a pole, which degrades the phase
margin, leading to instability. Excessive stray capacitance on the
output also forms a pole, which degrades phase margin.
相關PDF資料
PDF描述
SMCJ16A TVS UNIDIRECT 1500W 16V SMC
LTC2051CS8#PBF IC OPAMP ZERO DRIFT DUAL 8SOIC
SMCJ28A TVS UNIDIRECT 1500W 28V SMC
929834-01-27-RK CONN HEADER 27POS SNGL .100 STR
9-146253-0-03 CONN HDR BRKWAY .100 06POS VERT
相關代理商/技術參數
參數描述
AD8000YRDZ-REEL 功能描述:IC OPAMP CF LN 100MA 8SOIC RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:通用 電路數:2 輸出類型:滿擺幅 轉換速率:1.8 V/µs 增益帶寬積:6.5MHz -3db帶寬:4.5MHz 電流 - 輸入偏壓:5nA 電壓 - 輸入偏移:100µV 電流 - 電源:65µA 電流 - 輸出 / 通道:35mA 電壓 - 電源,單路/雙路(±):1.8 V ~ 5.25 V,±0.9 V ~ 2.625 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP,10-MSOP(0.118",3.00mm 寬) 供應商設備封裝:10-MSOP 包裝:管件
AD8000YRDZ-REEL7 功能描述:IC OPAMP CF LN 100MA 8SOIC RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:通用 電路數:2 輸出類型:滿擺幅 轉換速率:1.8 V/µs 增益帶寬積:6.5MHz -3db帶寬:4.5MHz 電流 - 輸入偏壓:5nA 電壓 - 輸入偏移:100µV 電流 - 電源:65µA 電流 - 輸出 / 通道:35mA 電壓 - 電源,單路/雙路(±):1.8 V ~ 5.25 V,±0.9 V ~ 2.625 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP,10-MSOP(0.118",3.00mm 寬) 供應商設備封裝:10-MSOP 包裝:管件
AD8001 制造商:AD 制造商全稱:Analog Devices 功能描述:800 MHz, 50 mW Current Feedback Amplifier
AD8001_03 制造商:AD 制造商全稱:Analog Devices 功能描述:800 MHz, 50 mW Current Feedback Amplifier
AD800-10-TO5I 功能描述:光電二極管 800um active area APD chip w/ IR RoHS:否 制造商:Vishay Semiconductors 產品:Photodiodes 反向電壓:10 V 最大暗電流:30 nA 峰值波長:565 nm 上升時間:3.1 us 下降時間:3 us 半強度角度:50 deg 封裝 / 箱體:TO-5