參數資料
型號： AD9216BCPZRL7-65
廠商： Analog Devices Inc
文件頁數： 4/40頁
文件大?。?/td> 0K
描述： IC ADC 10BIT DUAL 65MSPS 64LFCSP
標準包裝： 750
位數： 10
采樣率（每秒）： 65M
數據接口： 并聯
轉換器數目： 2
功率耗散（最大）： 240mW
電壓電源： 單電源
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 64-VFQFN 裸露焊盤，CSP
供應商設備封裝： 64-LFCSP-VQ（9x9）
包裝： 帶卷 (TR)
輸入數目和類型： 4 個單端，單極；2 個差分，單極
AD9216
Rev. A | Page 12 of 40
Noise (for Any Range within the ADC)
This value includes both thermal and quantization noise.
×
=
10
.001
0
dBFS
dBc
dBm
Signal
SNR
FS
Z
Vnoise
where:
Z
is the input impedance.
FS
is the full scale of the device for the frequency in question.
SNR
is the value for the particular input level.
Signal
is the signal level within the ADC reported in dB below
full scale.
Power Supply Rejection Ratio
The specification shows the maximum change in full scale
from the value with the supply at the minimum limit to the
value with the supply at its maximum limit.
Signal-to-Noise and Distortion (SINAD)
The ratio of the rms signal amplitude (set 1 dB below full scale)
to the rms value of the sum of all other spectral components,
including harmonics, but excluding dc.
Signal-to-Noise Ratio (without Harmonics)
The ratio of the rms signal amplitude (set at 1 dB below
full scale) to the rms value of the sum of all other spectral
components, excluding the first seven harmonics and dc.
Spurious-Free Dynamic Range (SFDR)
The ratio of the rms signal amplitude to the rms value of
the peak spurious spectral component. The peak spurious
component may or may not be a harmonic. It also may be
reported in dBc (that is, degrades as signal level is lowered)
or dBFS (that is, always related back to converter full scale).
Two-Tone Intermodulation Distortion Rejection
The ratio of the rms value of either input tone to the rms value
of the worst third-order intermodulation product, in dBc.
Two-Tone SFDR
The ratio of the rms value of either input tone to the rms value
of the peak spurious component. The peak spurious
component may or may not be an IMD product. It also may be
reported in dBc (that is, degrades as signal level is lowered) or
in dBFS (that is, always relates back to converter full scale).
Worst Other Spur
The ratio of the rms signal amplitude to the rms value of the
worst spurious component (excluding the second and third
harmonic), reported in dBc.
Transient Response Time
The time it takes for the ADC to reacquire the analog input
after a transient from 10% above negative full scale to 10%
below positive full scale.
Out-of-Range Recovery Time
The time it takes for the ADC to reacquire the analog input
after a transient from 10% above positive full scale to 10% above
negative full scale, or from 10% below negative full scale to 10%
below positive full scale.
相關PDF資料
PDF描述
VE-B2L-MW-F2 CONVERTER MOD DC/DC 28V 100W
VE-23P-IW-S CONVERTER MOD DC/DC 13.8V 100W
VI-264-MY CONVERTER MOD DC/DC 48V 50W
VE-B2L-MW-F1 CONVERTER MOD DC/DC 28V 100W
VE-23P-CU-F4 CONVERTER MOD DC/DC 13.8V 200W
相關代理商/技術參數
參數描述
AD9216BCPZRL7-80 功能描述:IC ADC 10BIT DUAL 80MSPS 64LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極
AD9218 制造商:AD 制造商全稱:Analog Devices 功能描述:10-Bit, 40/65/80/105 MSPS 3 V Dual A/D Converter
AD9218_06 制造商:AD 制造商全稱:Analog Devices 功能描述:10-Bit, 40/65/80/105 MSPS 3 V Dual Analog-to-Digital Converter
AD9218-105PCB 制造商:Analog Devices 功能描述:DUAL 10 BIT 105/80/65 MSPS ADC EVAL BD. - Bulk
AD9218-65PCB 制造商:AD 制造商全稱:Analog Devices 功能描述:10-Bit, 40/65/80/105 MSPS 3 V Dual A/D Converter
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*