![](http://datasheet.mmic.net.cn/Analog-Devices-Inc/ADG1204YRUZ-REEL7_datasheet_96057/ADG1204YRUZ-REEL7_7.png)
ADG1204
Rev. B | Page 7 of 16
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
Rating
VDD to VSS
35 V
VDD to GND
0.3 V to +25 V
VSS to GND
+0.3 V to 25 V
VSS 0.3 V to VDD + 0.3 V or
30 mA, whichever occurs first
GND 0.3 V to VDD + 0.3 V or
30 mA, whichever occurs first
Peak Current, S or D
100 mA (pulsed at 1 ms,
10% duty cycle maximum)
Continuous Current
45 mA
Operating Temperature Range
Automotive (Y Version)
40°C to +125°C
Storage Temperature Range
65°C to +150°C
Junction Temperature
150°C
14-Lead TSSOP, θJA Thermal
Impedance (4-Layer Board)
112°C/W
12-Lead LFCSP_VQ,
θJA Thermal Impedance
80°C/W
Reflow Soldering Peak
Temperature, Pb Free
260°C
1 Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any one time.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.