ADG3123
Data Sheet
Rev. B | Page 4 of 12
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 2.
Parameter
Rating
VDDA/VDDB to VSS
44 V
VDDB to GND
0.3 V to +32 V
VDDA to GND
0.3 V to VDDB
VSS to GND
+0.3 V to 32 V
VSS 0.3 V to VDDB + 0.3 V or
20 mA, whichever occurs first
Load Current Per Device
Average
15 mA at 25°C
8 mA at 85°C
150 mA at 25°C
80 mA at 85°C
Operating Temperature Range
Industrial (B Version)
40°C to +85°C
Storage Temperature Range
65°C to +125°C
Junction Temperature
150°C
Thermal Impedance, θJA
Reflow Soldering (Pb-Free)
Peak Temperature
260 (+0/5)°C
Time at Peak Temperature
10 seconds to 40 seconds
1
Overvoltage at Pin A1 to Pin A8 is clamped by internal diodes. Limit the
current to the maximum ratings given.
2
Pulsed at 100 kHz; 10% duty cycle maximum with the load shown i
n Figure 2.3
Guaranteed when the device is soldered on a 4-layer board.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any
one time.
ESD CAUTION