June 12, 2002
Am29PL160C
25
ABSOLUTE MAXIMUM RATINGS
Storage Temperature
Plastic Packages . . . . . . . . . . . . . . . -65°C to +150°C
Ambient Temperature
with Power Applied . . . . . . . . . . . . . -65°C to +125°C
Voltage with Respect to Ground
V
CC
(Note 1). . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
A9 and OE# (Note 2) . . . . . . . . . .–0.5 V to +13.0 V
All other pins (Note 1). . . . . . . . . . .–0.5 V to +5.5 V
Output Short Circuit Current (Note 3) . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During
voltage transitions, input at I/O pins may overshoot V
SS
to
-2.0 V for periods of up to 20 ns. Maximum DC voltage on
output and I/O pins is V
CC
+ 0.5 V. During voltage
transitions output pins may overshoot to V
CC
+ 2.0 V for
periods up to 20 ns.
2. Minimum DC input voltage on pins A9 and OE# is –0.5 V.
During voltage transitions, A9 and OE# may overshoot
V
SS
to -2.0 V for periods of up to 20 ns. Maximum DC
input voltage on pin A9 and OE# is +13.0 V which may
overshoot to 14.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a
time. Duration of the short circuit should not be greater
than one second.
4. Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only; functional operation of the de-
vice at these or any other conditions above those indi-
cated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rat-
ing conditions for extended periods may affect device re-
liability.
OPERATING RANGES
Commercial (C) Devices
Ambient Temperature (T
A
) . . . . . . . . . . . 0°C to +70°C
Industrial (I) Devices
Ambient Temperature (T
A
) . . . . . . . . . –40°C to +85°C
V
CC
Supply Voltages
V
CC
for regulated voltage range. . . . . . .3.0 V to 3.6 V
V
CC
for full voltage range. . . . . . . . . . . .2.7 V to 3.6 V
Operating ranges define those limits between which the func-
tionality of the device is guaranteed.
20 ns
20 ns
+0.8 V
–0.5 V
20 ns
–2.0 V
Figure 5.
Overshoot Waveform
Maximum Negative
20 ns
20 ns
V
CC
+2.0 V
V
+0.5 V
20 ns
2.0 V
Figure 6.
Overshoot Waveform
Maximum Positive