參數資料
型號: AT90S8515A-8PC
廠商: Atmel
文件頁數: 44/112頁
文件大?。?/td> 0K
描述: IC MCU 8K FLSH 8MHZ 40DIP
標準包裝: 18
系列: AVR® 90S
核心處理器: AVR
芯體尺寸: 8-位
速度: 8MHz
連通性: SPI,UART/USART
外圍設備: 欠壓檢測/復位,POR,PWM,WDT
輸入/輸出數: 32
程序存儲器容量: 8KB(4K x 16)
程序存儲器類型: 閃存
EEPROM 大?。?/td> 512 x 8
RAM 容量: 512 x 8
電壓 - 電源 (Vcc/Vdd): 4 V ~ 6 V
振蕩器型: 內部
工作溫度: 0°C ~ 70°C
封裝/外殼: 40-DIP(0.600",15.24mm)
包裝: 管件
37
AT90S8515
0841G–09/01
Timer/Counter1 Control
Register B – TCCR1B
Bit 7 – ICNC1: Input Capture1 Noise Canceler (4 CKs)
When the ICNC1 bit is cleared (zero), the input capture trigger noise canceler function is
disabled. The input capture is triggered at the first rising/falling edge sampled on the ICP
(input capture pin) as specified. When the ICNC1 bit is set (one), four successive sam-
ples are measured on the ICP, and all samples must be high/low according to the input
capture trigger specification in the ICES1 bit. The actual sampling frequency is XTAL
clock frequency.
Bit 6 – ICES1: Input Capture1 Edge Select
While the ICES1 bit is cleared (zero), the Timer/Counter1 contents are transferred to the
Input Capture Register (ICR1) on the falling edge of the input capture pin (ICP). While
the ICES1 bit is set (one), the Timer/Counter1 contents are transferred to the ICR1 on
the rising edge of the ICP.
Bits 5, 4 – Res: Reserved Bits
These bits are reserved bits in the AT90S8515 and always read zero.
Bit 3 – CTC1: Clear Timer/Counter1 on Compare Match
When the CTC1 control bit is set (one), the Timer/Counter1 is reset to $0000 in the clock
cycle after a compareA match. If the CTC1 control bit is cleared, Timer/Counter1 contin-
ues counting and is unaffected by a compare match. Since the compare match is
detected in the CPU clock cycle following the match, this function will behave differently
when a prescaling higher than 1 is used for the timer. When a prescaling of 1 is used,
and the compareA register is set to C, the timer will count as follows if CTC1 is set:
... | C-2 | C-1 | C | 0 | 1 | ...
When the prescaler is set to divide by 8, the timer will count like this:
... | C-2, C-2, C-2, C-2, C-2, C-2, C-2, C-2 | C-1, C-1, C-1, C-1, C-1, C-1, C-1, C-1 | C, 0,
0, 0, 0, 0, 0, 0 | ...
In PWM mode, this bit has no effect.
Bits 2, 1, 0 – CS12, CS11, CS10: Clock Select1, Bits 2, 1 and 0
The Clock Select1 bits 2, 1 and 0 define the prescaling source of Timer/Counter1.
Bit
7
6
5
4
3210
$2E ($4E)
ICNC1
ICES1
CTC1
CS12
CS11
CS10
TCCR1B
Read/Write
R/W
R
R/W
Initial Value
0
0000
Table 10. Clock 1 Prescale Select
CS12
CS11
CS10
Description
0
Stop, the Timer/Counter1 is stopped.
00
1
CK
01
0
CK/8
01
1
CK/64
1
0
CK/256
1
0
1
CK/1024
1
0
External Pin T1, falling edge
1
External Pin T1, rising edge
相關PDF資料
PDF描述
AT90S8535-8PI IC MCU 8K FLSH 8MHZ A/D IT 40DIP
AT90USB1287-16AUR IC MCU AVR 128K ISP USB TQFP64
AT90USB162-16AUR IC AVR MCU 16K FLASH 32TQFP
AT91FR40162SB-CU-999 IC MCU 32BIT RISC 121BGA
AT91M40800-33AI SL383 IC ARM MCU 16BIT 100TQFP
相關代理商/技術參數
參數描述
AT90S8515A-8PI 功能描述:IC MCU 8BIT 8KB FLASH 40DIP 制造商:microchip technology 系列:AVR? 90S 包裝:管件 零件狀態:停產 核心處理器:AVR 核心尺寸:8-位 速度:8MHz 連接性:SPI,UART/USART 外設:欠壓檢測/復位,POR,PWM,WDT I/O 數:32 程序存儲容量:8KB(4K x 16) 程序存儲器類型:閃存 EEPROM 容量:512 x 8 RAM 容量:512 x 8 電壓 - 電源(Vcc/Vdd):4 V ~ 6 V 數據轉換器:- 振蕩器類型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:40-DIP(0.600",15.24mm) 供應商器件封裝:40-PDIP 基本零件編號:AT90S8515 標準包裝:18
AT90S8515-JC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
AT90S8515-JI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
AT90S8515-PC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
AT90S8515-PI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller