參數資料
型號: AV80C51C-36D
廠商: ATMEL CORP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 36 MHz, MICROCONTROLLER, PQFP44
封裝: 1.40 MM HEIGHT, QFP-44
文件頁數: 13/170頁
文件大小: 4133K
代理商: AV80C51C-36D
11
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
When using the SEI instruction to enable interrupts, the instruction following SEI will be executed before any pend-
ing interrupts, as shown in the following example.
Note:
4.7.1
Interrupt Response Time
The interrupt execution response for all the enabled AVR interrupts is four clock cycles minimum. After four clock
cycles the Program Vector address for the actual interrupt handling routine is executed. During this four clock cycle
period, the Program Counter is pushed onto the Stack. The vector is normally a jump to the interrupt routine, and
this jump takes three clock cycles. If an interrupt occurs during execution of a multi-cycle instruction, this instruction
is completed before the interrupt is served. If an interrupt occurs when the MCU is in sleep mode, the interrupt exe-
cution response time is increased by four clock cycles. This increase comes in addition to the start-up time from the
selected sleep mode.
A return from an interrupt handling routine takes four clock cycles. During these four clock cycles, the Program
Counter (two bytes) is popped back from the Stack, the Stack Pointer is incremented by two, and the I-bit in SREG
is set.
4.8
Register Description
4.8.1
CCP – Configuration Change Protection Register
Bits 7:0 – CCP[7:0] – Configuration Change Protection
In order to change the contents of a protected I/O register the CCP register must first be written with the correct
signature. After CCP is written the protected I/O registers may be written to during the next four CPU instruction
cycles. All interrupts are ignored during these cycles. After these cycles interrupts are automatically handled again
by the CPU, and any pending interrupts will be executed according to their priority.
When the protected I/O register signature is written, CCP[0] will read as one as long as the protected feature is
enabled, while CCP[7:1] will always read as zero.
Table 4-1 shows the signatures that are in recognised.
Assembly Code Example
sei
; set Global Interrupt Enable
sleep
; enter sleep, waiting for interrupt
; note: will enter sleep before any pending interrupt(s)
Bit
7
6
5432
10
CCP[7:0]
CCP
Read/Write
W
WWWW
WW
R/W
Initial Value
0
0000
00
Table 4-1.
Signatures Recognised by the Configuration Change Protection Register
Signature
Group
Description
0xD8
IOREG: CLKMSR, CLKPSR, WDTCSR
Protected I/O register
相關PDF資料
PDF描述
AS80C51C-12D 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQCC44
AS80C51C-12R 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQCC44
AF280C51C-16R 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP44
AV80C51C-36R 8-BIT, MROM, 36 MHz, MICROCONTROLLER, PQFP44
ABM3B-FREQ2-18-R100-4-H-T QUARTZ CRYSTAL RESONATOR, 10 MHz - 11.999 MHz
相關代理商/技術參數
參數描述
AV810 功能描述:HOME THEATER PREMIUM SURGE 8 OUT 制造商:tripp lite 系列:- 零件狀態:有效 類型:Outlet Strip,Surge Protector 安裝類型:工作臺,地面,墻壁 電流 - 最大值:15A 使用地區:適用于北美地區 過載保護:斷路器 連接器 - AC 輸入:NEMA 5-15R 連接器 - AC 輸出:NEMA 5-15R 電壓 - 輸入:120V 外殼材料:塑料 受保護的介質線路:F 型同軸,RJ11 AC 插座:8 能量:3240J 電線長度:10'(3.05m) 認可:FCC,IC,UL 特性:- 重量:* 標準包裝:6
AV8100EVAL01 制造商:ST Ericsson 功能描述:DSI TO HDMI EVALUATION BOARD. USB CONTROLLED - Bulk 制造商:ST-Ericsson 功能描述:DSI TO HDMI EVALUATION BOARD. USB CONTROLLED - Bulk
AV8100F)R 功能描述:IC TRANSMITTER HDMI ANLG 56VFBGA 制造商:st-ericsson inc 系列:- 包裝:托盤 零件狀態:停產 類型:HDMI 發射器 應用:便攜式設備 安裝類型:表面貼裝 封裝/外殼:56-VFBGA 供應商器件封裝:56-VFBGA 標準包裝:4,860
AV8100F)RT 功能描述:IC TRANSMITTER HDMI ANLG 56VFBGA 制造商:st-ericsson inc 系列:- 包裝:帶卷(TR) 零件狀態:停產 類型:HDMI 發射器 應用:便攜式設備 安裝類型:表面貼裝 封裝/外殼:56-VFBGA 供應商器件封裝:56-VFBGA 標準包裝:2,500
AV83C151C-12 制造商:TEMIC 制造商全稱:TEMIC Semiconductors 功能描述:CMOS 0 to 36 MHz Single Chip 8-bit Microcontroller