參數資料
型號： AV80C51T-12R
廠商： TEMIC SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP44
文件頁數： 15/170頁
文件大?。?/td> 4133K
代理商： AV80C51T-12R
111
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
15.4.3
Programming the Flash
The Flash can be written word-by-word. Before writing a Flash word, the Flash target location must be erased.
Writing to an un-erased Flash word will corrupt its content.
The Flash is word-accessed for writing, and the data space uses byte-addressing to access Flash that has been
mapped to data memory. It is therefore important to write the word in the correct order to the Flash, namely low
bytes before high bytes. First, the low byte is written to the temporary buffer. Then, writing the high byte latches
both the high byte and the low byte into the Flash word buffer, starting the write operation to Flash.
The Flash erase operations can only performed for the entire Flash sections.
The Flash programming sequence is as follows:
1.
Perform a Flash section erase or perform a Chip erase
2.
Write the Flash section word by word
15.4.3.1
Chip Erase
The Chip Erase command will erase the entire code section of the Flash memory and the NVM Lock Bits. For
security reasons, the NVM Lock Bits are not reset before the code section has been completely erased. Configura-
tion, Signature and Calibration sections are not changed.
Before starting the Chip erase, the NVMCMD register must be loaded with the CHIP_ERASE command. To start
the erase operation a dummy byte must be written into the high byte of a word location that resides inside the Flash
code section. The NVMBSY bit remains set until erasing has been completed. While the Flash is being erased nei-
ther Flash buffer loading nor Flash reading can be performed.
The Chip Erase can be carried out as follows:
1.
Write the CHIP_ERASE command to the NVMCMD register
2.
Start the erase operation by writing a dummy byte to the high byte of any word location inside the code
section
3.
Wait until the NVMBSY bit has been cleared
15.4.3.2
Erasing the Code Section
The algorithm for erasing all pages of the Flash code section is as follows:
1.
Write the SECTION_ERASE command to the NVMCMD register
2.
Start the erase operation by writing a dummy byte to the high byte of any word location inside the code
section
3.
Wait until the NVMBSY bit has been cleared
15.4.3.3
Writing a Code Word
The algorithm for writing a word to the code section is as follows:
1.
Write the WORD_WRITE command to the NVMCMD register
2.
Write the low byte of the data into the low byte of a word location
3.
Write the high byte of the data into the high byte of the same word location. This will start the Flash write
operation
4.
Wait until the NVMBSY bit has been cleared
相關PDF資料
PDF描述
AF180C51T-16D 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP44
AF180C51-30D 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQFP44
AT80C51-25R 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP44
AS80C31-36D 8-BIT, 36 MHz, MICROCONTROLLER, PQCC44
AS80C51C-36D 8-BIT, MROM, 36 MHz, MICROCONTROLLER, PQCC44
相關代理商/技術參數
參數描述
AV810 功能描述:HOME THEATER PREMIUM SURGE 8 OUT 制造商:tripp lite 系列:- 零件狀態:有效 類型:Outlet Strip，Surge Protector 安裝類型:工作臺，地面，墻壁 電流 - 最大值:15A 使用地區:適用于北美地區 過載保護:斷路器 連接器 - AC 輸入:NEMA 5-15R 連接器 - AC 輸出:NEMA 5-15R 電壓 - 輸入:120V 外殼材料:塑料 受保護的介質線路:F 型同軸，RJ11 AC 插座:8 能量:3240J 電線長度:10'（3.05m） 認可:FCC，IC，UL 特性:- 重量:* 標準包裝:6
AV8100EVAL01 制造商:ST Ericsson 功能描述:DSI TO HDMI EVALUATION BOARD. USB CONTROLLED - Bulk 制造商:ST-Ericsson 功能描述:DSI TO HDMI EVALUATION BOARD. USB CONTROLLED - Bulk
AV8100F)R 功能描述:IC TRANSMITTER HDMI ANLG 56VFBGA 制造商:st-ericsson inc 系列:- 包裝:托盤 零件狀態:停產 類型:HDMI 發射器 應用:便攜式設備 安裝類型:表面貼裝 封裝/外殼:56-VFBGA 供應商器件封裝:56-VFBGA 標準包裝:4,860
AV8100F)RT 功能描述:IC TRANSMITTER HDMI ANLG 56VFBGA 制造商:st-ericsson inc 系列:- 包裝:帶卷（TR） 零件狀態:停產 類型:HDMI 發射器 應用:便攜式設備 安裝類型:表面貼裝 封裝/外殼:56-VFBGA 供應商器件封裝:56-VFBGA 標準包裝:2,500
AV83C151C-12 制造商:TEMIC 制造商全稱:TEMIC Semiconductors 功能描述:CMOS 0 to 36 MHz Single Chip 8-bit Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*